Lines Matching refs:switchdev

10 :ref:`Documentation/networking/switchdev.rst <switchdev>`.
43 This document uses the term "switchdev function" to refer to the PCIe function
47 Depending on NIC design, a multi-port NIC might have a single switchdev function
49 switchdev function, for each physical network port.
50 If the NIC supports nested switching, there might be separate switchdev
51 functions for each nested switch, in which case each switchdev function should
98  - VFs belonging to the switchdev function.
146 The driver instance attached to the switchdev function should, for each virtual
148 in-kernel reference to the switchdev function's own netdevice or driver private
154 through the switchdev function.  For example, ``ndo_start_xmit()`` might send
155 the packet through a hardware TX queue attached to the switchdev function, with
164 representee or of the switchdev function.
176 instance if the switchdev function is ``eth4`` then a representor with a
210 instead be the switchdev function's own uplink netdevice.
218 require an IP address to be bound to the underlay device (e.g. switchdev