Lines Matching refs:CAN
10 SAE J1939 defines a higher layer protocol on CAN. It implements a more
59 The J1939 sockets operate on CAN network devices (see SocketCAN). Any J1939
60 user space library operating on CAN raw sockets will still operate properly.
72 The J1939 protocol uses the 29-bit CAN identifier with the following structure:
75 29 bit CAN-ID
77 Bit positions within the CAN-ID
90 Bit positions within the CAN-ID
105 Bit positions within the CAN-ID
115 Bit positions within the CAN-ID
128 Regarding PGN mapping to 29-bit CAN identifier, the Destination Address shall
171 On CAN, you first need to open a socket for communicating over a CAN network.
181 packets to the other end (using several CAN packets). ``SOCK_STREAM`` is not
185 and/or ``connect(2)`` system call to bind the socket to a CAN interface. After
194 Different from CAN is that the payload data is just the data that get sends,
235 Claiming for this name was done on the CAN bus and registered/cached by the