Lines Matching full:default
11 - 0 - disabled (default)
17 parameters to their default state (RFC1122 for hosts, RFC1812
21 Default value of TTL field (Time To Live) for outgoing (but not
23 Default: 64 (as recommended by RFC1700)
50 Default: FALSE
53 default 552 - minimum Path MTU. Unless this is changed manually,
57 By default we don't trust protocol path MTUs while forwarding
65 Default: 0 (disabled)
78 Default: 0
86 Default: 0 (disabled)
97 Default: 0 (Layer 3)
132 Default: 0x0007 (source IP, destination IP and IP protocol)
138 Default: 512kB Minimum: 64kB Maximum: 64MB
145 Default: 1 (Update priority.)
162 neigh/default/gc_thresh1 - INTEGER
166 Default: 128
168 neigh/default/gc_thresh2 - INTEGER
173 Default: 512
175 neigh/default/gc_thresh3 - INTEGER
180 Default: 1024
182 neigh/default/unres_qlen_bytes - INTEGER
189 Default: SK_WMEM_MAX, (same as net.core.wmem_default).
195 neigh/default/unres_qlen - INTEGER
201 Prior to linux 3.3, the default value is 3 which may cause
202 unexpected packet loss. The current default value is calculated
203 according to default value of unres_qlen_bytes and true size of
206 Default: 101
208 neigh/default/interval_probe_time_ms - INTEGER
212 Default: 5000
234 Default: 0 (Do not emit notifications.)
277 Default: 64
284 Default: 0
317 reset them. Default state is FALSE. It means that if overflow
331 Default: 1
338 Default is "reno" and the default setting (tcp_congestion_control).
346 Default: 31
357 Default : 1
373 Default : 48
382 Default : 48 (at least 8 bytes of payload per segment)
388 Default is set as part of kernel configuration.
407 Default: 3
426 Default: 2
436 Default: 1 (fallback enabled)
451 Default: 60 seconds
460 By default it's enabled with a non-zero value. 0 disables F-RTO.
471 Default: 0
493 Default: 500 (milliseconds).
497 Default: 2hours.
501 connection is broken. Default value: 9.
506 after probes started. Default value: 75sec i.e. connection
517 Default: 0 (disabled)
529 if network conditions require more than default value,
554 if network conditions require more than default value.
579 Default: 300
585 default.
592 - 1 - Disabled by default, enabled when an ICMP black hole detected
597 Discovery reprobe. The default is reprobing every 10 minutes as
602 will stop in respect to the width of search range in bytes. Default
606 By default, TCP saves various connection metrics in the route cache
616 Default is 1, which disables ssthresh metrics.
623 The default value is 8.
643 Default: 0x1
653 Default: 0 (disabled)
660 Default: 3
667 Default: 300
681 default.
690 The default value of 15 yields a hypothetical timeout of 924.6
703 Default: 0
705 tcp_rmem - vector of 3 INTEGERs: min, default, max
710 Default: 4K
712 default: initial size of receive buffer used by TCP sockets.
714 Default: 131072 bytes.
722 Default: between 131072 and 6MB, depending on RAM size.
730 The default is 1ms, based on TSO autosizing period.
732 Default : 1,000,000 ns (1 ms)
740 Default : 100,000 ns (100 us)
746 Default : 44
754 Default: 1
761 Default: FALSE
765 be retransmitted. Should not be higher than 255. Default value
774 Default: 1
818 Default: 0
824 The client support is enabled by flag 0x1 (on by default). The client
828 The server support is enabled by flag 0x2 (off by default). Then
844 default without explicit TCP_FASTOPEN socket option.
847 Default: 0x1
860 By default, it is set to 0 (feature is disabled).
884 will be retransmitted. Should not be higher than 127. Default value
898 Default: 1
909 Default: 2
932 Default: 9 (2^9 = 512 usec)
941 Default: 200
949 Default: 120
959 Default: 4
967 Default: 3
980 Default: 2
998 Default: 0
1000 tcp_wmem - vector of 3 INTEGERs: min, default, max
1004 Default: 4K
1006 default: initial size of send buffer used by TCP sockets. This
1011 Default: 16K
1019 Default: between 64K and 4MB, depending on RAM size.
1032 Default: UINT_MAX (0xFFFFFFFF)
1040 Default: 0
1053 Default: 0
1065 Default: 1048576 (16 * 65536)
1073 Default: INT_MAX (unlimited)
1097 Note also that the default value of tcp_max_tw_buckets and
1102 Default: 0
1126 Default: FALSE
1136 Default: 3
1147 Default: 12
1159 Default: 60
1177 Default: 128
1189 Default: 0 (disabled)
1200 Default is calculated at boot time from amount of available memory.
1207 Default: 4K
1236 Default: 0
1249 Default: 1 (enabled)
1261 Default: 1
1271 Default: 10
1279 Default: 0
1289 Default: 0
1301 The default values are 32768 and 60999 respectively.
1334 Default: Empty
1343 Default: 1024
1349 Default: 0
1352 By default, bind() does not select the ports automatically even if
1358 Default: 0
1366 Default: 0
1376 Default: 1
1380 The default is "1 0", meaning, that nobody (not even root) may
1388 Default: 1
1394 Default: 1
1400 Default: 0
1406 Default: 0
1412 Default: 1
1422 Default: 1000
1430 Default: 1000
1437 Default: 50
1444 Default mask: 0000001100000011000 (6168)
1464 .. [1] These are rate limited by default (see default mask above)
1472 Default: 1
1489 Default: 0
1493 Default: 20
1517 Default: 10
1522 Default: 2 (as specified by RFC2236 8.1)
1527 - 0 - (default) No enforcement of a IGMP version, IGMPv1/v2 fallback
1534 - 3 - Enforce to use IGMP version 3. The same react with default 0.
1541 this value as default 0 is recommended.
1570 default:
1589 The default value 0 means that the device is the only interface
1640 default TRUE
1653 default TRUE
1662 Default: TRUE
1671 default FALSE
1680 default
1689 default FALSE
1695 default FALSE
1702 By default failed packets are discarded.
1715 Default value is 0. Note that some distributions enable it
1735 Default value is 0.
1745 - 0 - (default) The kernel can respond to arp requests with addresses
1761 - 0 - (default) Use any local address, configured on any interface
1792 - 0 - (default): reply for any local target IP address, configured
1811 0 (default): do nothing
1837 remain as the default (1).
1839 - 1 - (default): Clear the ARP cache on NOCARRIER events
1870 Default: 10000 (10 seconds)
1876 Default: 1000 (1 seconds)
1891 1122, but is disabled by default for compatibility reasons.
1893 Default: off (0)
1900 Default: off (0)
1906 Default value is 0.
1918 Default TRUE
1940 Default value for IPV6_V6ONLY socket option,
1947 Default: FALSE (as specified in RFC3493)
1957 Default: TRUE
1967 1 automatic flow labels are enabled by default, they can be
1976 Default: 1
1986 Default: true
2008 Default: 0
2013 Default: 0 (Layer 3)
2048 Default: 0x0007 (source IP, destination IP and IP protocol)
2057 Default: FALSE
2064 Default: 1 (as specified in RFC7217)
2070 Default: 3 (as specified in RFC7217)
2075 Default: 2 (as specified by RFC3810 9.1)
2085 Default: 8
2093 Default: 8
2099 Default: INT_MAX (unlimited)
2105 Default: INT_MAX (unlimited)
2110 generate this message; IPv6 does by default. Setting this sysctl
2114 Default: false (generate message)
2119 default which means route dumps and notifications contain the new
2126 Default: true (backward compat mode)
2141 Default: 0 (Do not emit notifications.)
2155 Default: 0xFFFFFF
2164 Default: 0xFFFFFFFFFFFFFF
2180 ``conf/default/*``:
2181 Change the interface-specific default settings.
2192 Changing this value is same as changing ``conf/default/disable_ipv6``
2221 Default: 0
2246 Functional default:
2252 Learn default router in Router Advertisement.
2254 Functional default:
2260 Route metric for default route learned in Router Advertisement. This value
2261 will be assigned as metric for the default route learned via IPv6 Router
2267 Default: IP6_RT_PRIO_USER i.e. 1024.
2273 Default is to NOT accept these as it may be an un-intended
2276 Functional default:
2289 Default: 1
2297 Default: 0
2302 Functional default:
2313 Functional default:
2324 Functional default:
2332 Functional default:
2341 Functional default:
2349 Functional default:
2360 Default: 0
2366 Functional default:
2374 Default: 1
2391 By default, Host behaviour is assumed. This means:
2394 2. If accept_ra is TRUE (default), transmit Router
2396 3. If accept_ra is TRUE (default), accept Router
2398 4. If accept_redirects is TRUE (default), accept Redirects.
2410 Default: 0 (disabled) if global forwarding is disabled (default),
2414 Default Hop Limit to set.
2416 Default: 64
2419 Default Maximum Transfer Unit
2421 Default: 1280 (IPv6 required minimum)
2427 Default: 0
2433 Default: 60
2439 Default: 1
2444 Default: 4
2450 Default: 3
2457 Default: false
2468 Default:
2476 Default: 172800 (2 days)
2481 Default: 86400 (1 day)
2488 * 0 : system default
2491 Default: 0 (addresses are removed)
2499 Default: 600
2505 Default: 5
2513 Default: 16
2520 Default: FALSE (enable IPv6 operation)
2536 1 Enable DAD (default)
2548 Default: FALSE
2566 * 0 - (default): do nothing
2571 The IPv6 Traffic Class to use by default when sending IPv6 Neighbor
2578 * 0 - (default)
2584 In most cases this should remain as the default (1).
2586 - 1 - (default): Clear neighbor discover cache on NOCARRIER events.
2593 Default: 10000 (10 seconds)
2599 Default: 1000 (1 second)
2602 * 0 - (default) No enforcement of a MLD version, MLDv1 fallback allowed
2610 * 1 - (default) discard fragmented neighbor discovery packets
2616 * 0: disabled (default)
2629 * 0: disabled (default)
2639 be stable privacy ones by default. This can be changed via the
2640 addrgenmode ip-link. conf/default/stable_secret is used as the
2647 By default the stable secret is unset.
2653 0 generate address based on EUI64 (default)
2665 By default this is turned off.
2672 By default this is turned off.
2678 - 0 - (default) Do not accept unsolicited and untracked neighbor
2713 Default: TRUE
2724 Default: 1000
2739 Default: 0-1,3-127 (rate limit ICMPv6 errors except Packet Too Big)
2745 Default: 0
2751 Default: 0
2757 Default: 0
2764 Default: 0
2785 Default: 1
2791 Default: 1
2797 Default: 1
2803 Default: 0
2809 Default: 0
2821 Default: 0
2836 Default: 0
2855 Default: 1
2877 Default: 0
2897 Default: 0
2908 Default: 0
2917 Default: 1
2923 Default: 4
2930 Default: 10
2937 Default: 8
2945 Default: 5
2961 Default: 0
2970 is disabled by initializing 'ps_retrans' per netns as 0xffff by default,
2973 Default: 0xffff
2980 Default: 3000
2986 Default: 60000
2992 Default: 1000
2999 Default: 30000
3005 Default: 200
3008 The default lifetime of the SCTP cookie (in milliseconds). The cookie
3011 Default: 60000
3020 Default: 1
3035 Default: Dependent on configuration. MD5 if available, else SHA1 if
3052 Default: 0
3060 Default: 0
3073 Default is calculated at boot time from amount of available memory.
3075 sctp_rmem - vector of 3 INTEGERs: min, default, max
3076 Only the first value ("min") is used, "default" and "max" are
3083 Default: 4K
3085 sctp_wmem - vector of 3 INTEGERs: min, default, max
3086 Only the first value ("min") is used, "default" and "max" are
3093 Default: 4K
3103 Default: 1
3118 Default: 0
3121 The default remote UDP encapsulation port.
3124 outgoing UDP-encapsulated SCTP packets by default. Users can also
3134 Default: 0
3146 Default: 0
3157 Default: 0
3171 Default: 0
3183 Default: 1
3192 Default: 1 (enabled)
3207 Default: 10