Lines Matching refs:VLAN
71 unintended traffic streams, configure all SR-IOV enabled ports for VLAN tagging
75 See "Configuring VLAN Tagging on SR-IOV Enabled Adapter Ports" later in this
499 Configuring VLAN Tagging on SR-IOV Enabled Adapter Ports
501 To configure VLAN tagging for the ports on an SR-IOV enabled adapter, use the
502 following command. The VLAN configuration should be done before the VF driver
503 is loaded or the VM is booted. The VF is not aware of the VLAN tag being
505 VLAN" mode).
511 For example, the following will configure PF eth0 and the first VF on VLAN 10::
589 Next, add a VLAN interface on the VF interface. For example::
594 VLAN interface does not matter (you can do either first). The result in this
595 example is that the VF will get all traffic that is tagged with VLAN 100.
619 MAC and VLAN Anti-Spoofing Feature for VFs
699 the VLAN priority tag (802.1p) to filter traffic. That means that there are 8
822 The IEEE 802.1ad standard, informally known as QinQ, allows for multiple VLAN
823 IDs within a single Ethernet frame. VLAN IDs are sometimes referred to as
824 "tags," and multiple VLAN IDs are thus referred to as a "tag stack." Tag stacks
826 VLAN ID, among other uses.
830 - Receive checksum offloads and VLAN acceleration are not supported for 802.1ad
833 - 0x88A8 traffic will not be received unless VLAN stripping is disabled with
844 1) The VF is not assigned a port VLAN.
848 - The VF may not receive all network traffic based on the Inner VLAN header
857 Where "24" and "371" are example VLAN IDs.