Lines Matching refs:PF
72 from the administrative interface on the PF. This configuration allows
148 - You cannot update the DDP package if any PF drivers are already loaded. To
152 - Only the first loaded PF per device can download a package for that device.
385 Accelerated Receive Flow Steering (aRFS) on the PF. aRFS is a load-balancing
477 how many VFs each PF supports, use the following command::
485 Displaying VF Statistics on the PF
487 Use the following command to display the statistics for the PF and its VFs::
494 The PF driver will display a subset of the statistics for the PF and for all
495 VFs that are configured. The PF will always print a statistics block for each
511 For example, the following will configure PF eth0 and the first VF on VLAN 10::
518 If the physical function (PF) link is down, you can force link up (from the
519 host PF) on any virtual functions (VF) bound to the PF.
521 For example, to force link up on VF 0 bound to PF eth0::
538 This setting lasts until the PF is reloaded.
549 trusted VF to request selective promiscuous mode on the Physical Function (PF).
557 If the VM is not trusted, the PF will ignore promiscuous mode requests from the
585 vf-true-promisc-support private flag is only exposed to the first PF of the
586 device. The PF remains in limited promiscuous mode regardless of the
602 packet until a VF driver reset occurs. You can view MDD messages in the PF's
605 - If the PF driver logs MDD events from the VF, confirm that the correct VF
609 - When automatic VF resets are enabled, the PF driver will immediately reset
611 - If automatic VF resets are disabled, the PF will not automatically reset the
817 MAC address of the underlying PF (Physical Function) device.
845 2) spoofchk is disabled from the PF. If you enable spoofchk, the VF will