Lines Matching refs:CAN
5 UCAN is the protocol used by the microcontroller-based USB-CAN
10 It is modeled closely after how Linux represents CAN devices
25 The device sends CAN data frames and CAN error frames
28 The driver sends CAN data frames on the out endpoint
36 To support multiple CAN interfaces in a single USB device all
82 Bring the CAN interface up.
96 Stop the CAN interface
106 Reset the CAN controller (including error counters)
166 Setup hardware CAN filters. Not yet supported by the driver.
226 Data received from the CAN bus (ID + payload).
234 The CAN device has sent a message to the CAN bus. It answers with a
245 When receiving CAN messages there is no flow control on the USB
288 Transmit a CAN frame. (parameters: ``id``, ``data``)
299 CAN Error Handling
302 If error reporting is turned on the device encodes errors into CAN