Lines Matching +full:monitor +full:- +full:interval +full:- +full:ms
12 provides a convenient connection point for a mouse and switch-type joysticks.
13 The ikbd processor also maintains a time-of-day clock with one second
18 The ikbd communicates with the main processor over a high speed bi-directional
41 0xF8-0xFB relative mouse position records (lsbs determined by
43 0xFC time-of-day
67 ---------------------------
92 +127...-128 range, the motion is broken into multiple packets.
97 ---------------------------
104 ---------------------
120 ------------------------
133 ----------------------
147 -------------------
156 ----------------------
167 ----------------------
177 Time-of-Day Clock
180 The ikbd also maintains a time-of-day clock for the system. Commands are
181 available to set and interrogate the timer-of-day clock. Time-keeping is
190 Power-Up Mode
193 The keyboard controller will perform a simple self-test on power-up to detect
195 keys. Any keys down at power-up are presumed to be stuck, and their BREAK
197 keyboard error). If the controller self-test completes without error, the code
219 -----
229 A reset may also be caused by sending a break lasting at least 200mS to the
231 Executing the RESET command returns the keyboard to its default (power-up)
232 mode and parameter settings. It does not affect the time-of-day clock.
233 The RESET command or function causes the ikbd to perform a simple self-test.
234 If the test is successful, the ikbd will send the code of 0xF0 within 300mS
235 of receipt of the RESET command (or the end of the break, or power-up). The
241 -----------------------
260 -------------------------------------
274 ------------------------------
292 ----------------------
308 -------------------
319 default to 1 at RESET (or power-up).
322 ---------------
339 --------------------------
360 -------------------
375 -----------------
387 --------------
399 ------
411 -------------
425 ------------
453 ----------------------------
463 -------------------------------
473 --------------------
484 -----------------------
496 Sets the ikbd to do nothing but monitor the serial command line, maintain the
497 time-of-day clock, and monitor the joystick. The rate sets the interval
503 --------------------------
512 Set the ikbd to do nothing but monitor the serial command line, maintain the
513 time-of-day clock, and monitor the fire button on Joystick 1. The fire button
516 The sample interval should be as constant as possible.
519 -------------------------
545 every Vn tenths of seconds. This provides a velocity (auto-repeat) breakpoint
552 -----------------
564 TIME-OF-DAY CLOCK SET
565 ---------------------
577 All time-of-day data should be sent to the ikbd in packed BCD format.
580 only some subfields of the time-of-day clock.
582 INTERROGATE TIME-OF-DAT CLOCK
583 -----------------------------
589 0xFC ; time-of-day event header
597 All time-of-day is sent in packed BCD format.
600 -----------
607 NUM ; number of bytes (0-128)
611 controller memory. The time between data bytes must be less than 20ms.
614 -----------
629 ------------------
641 ----------------
727 0C \-
789 4A KEYPAD -