Lines Matching +full:monitor +full:- +full:interval +full:- +full:ms
10 Addresses: I2C 0x40 - 0x4f
20 Addresses: I2C 0x40 - 0x4f
30 Addresses: I2C 0x40 - 0x4f
40 Addresses: I2C 0x40 - 0x4f
50 Addresses: I2C 0x40 - 0x4f
59 -----------
61 The INA219 is a high-side current shunt and power monitor with an I2C
65 The INA220 is a high or low side current shunt and power monitor with an I2C
68 The INA226 is a current shunt and power monitor with an I2C interface.
72 with an I2C interface. The chips monitor both a shunt voltage drop and
75 The shunt value in micro-ohms can be set via platform data or device tree at
76 compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
81 Documentation/hwmon/sysfs-interface.rst. Internally the interval is the sum of
84 lower limit of the update_interval is 2 ms, the upper limit is 2253 ms.
85 The actual programmed interval may vary from the desired value.
88 ---------------------
99 ------------------------------------------------
118 - Configure `shunt_resistor` before configure `power1_crit`, because power
120 - Because of the underlying register implementation, only one `*crit` setting