Lines Matching refs:then
88 Note: if cec_register_adapter() fails, then call cec_delete_adapter() to
89 clean up. But if cec_register_adapter() succeeded, then only call
138 capability is not set, then the physical address can change while the CEC
151 If enabled, then the adapter should be put in a mode to also monitor messages
163 If enabled, then the adapter should be put in a mode to also monitor CEC pin
175 If logical_addr == CEC_LOG_ADDR_INVALID then all programmed logical addresses
177 If the maximum number of available logical addresses is exceeded, then it
189 unconfiguration, then that can be done through this optional callback.
280 retrying messages. If set, then the framework assumes that it
290 to 1, if the hardware does support retry then either set these counters to
325 If the CEC adapter supports Error Injection functionality, then that can
342 If both callbacks are set, then an ``error-inj`` file will appear in debugfs.
346 line was reached, then the whole line is ignored. Otherwise a command is expected.
411 configuration, then that can be done through this optional callback.
419 If the driver wants to process a CEC message, then it can implement this
420 callback. If it doesn't want to handle this message, then it should return
434 Transmit a CEC message. If block is true, then wait until the message has been
442 the physical address has become valid, then the CEC framework will start
443 claiming the logical addresses. If block is true, then this function won't
448 then the CEC adapter will be disabled. If you change a valid physical address
449 to another valid physical address, then this function will first set the
465 is set. If block is true, then wait until the logical addresses have been
470 invalid. Once the physical address becomes valid, then the framework will