Lines Matching +full:inter +full:- +full:processor

11    - model : Should be "nintendo,wii"
12    - compatible : Should be "nintendo,wii"
16   This node represents the multi-function "Hollywood" chip, which packages
21    - compatible : Should be "nintendo,hollywood"
25   Represents the interface between the graphics processor and a external
30    - compatible : should be "nintendo,hollywood-vi","nintendo,flipper-vi"
31    - reg : should contain the VI registers location and length
32    - interrupts : should contain the VI interrupt
34 1.b) The Processor Interface (PI) node
36   Represents the data and control interface between the main processor
37   and graphics and audio processor.
41   - compatible : should be "nintendo,hollywood-pi","nintendo,flipper-pi"
42   - reg : should contain the PI registers location and length
52   - #interrupt-cells : <1>
53   - compatible : should be "nintendo,flipper-pic"
54   - interrupt-controller
56 1.c) The Digital Signal Processor (DSP) node
58   Represents the digital signal processor interface, designed to offload
63    - compatible : should be "nintendo,hollywood-dsp","nintendo,flipper-dsp"
64    - reg : should contain the DSP registers location and length
65    - interrupts : should contain the DSP interrupt
71   It's NOT a RS232-type interface.
75    - compatible : should be "nintendo,hollywood-si","nintendo,flipper-si"
76    - reg : should contain the SI registers location and length
77    - interrupts : should contain the SI interrupt
81   Represents the interface to the external 16-bit stereo digital-to-analog
86    - compatible : should be "nintendo,hollywood-ai","nintendo,flipper-ai"
87    - reg : should contain the AI registers location and length
88    - interrupts : should contain the AI interrupt
92   Represents the multi-channel SPI-like interface.
96    - compatible : should be "nintendo,hollywood-exi","nintendo,flipper-exi"
97    - reg : should contain the EXI registers location and length
98    - interrupts : should contain the EXI interrupt
106    - compatible : should be "nintendo,hollywood-usb-ehci","usb-ehci"
107    - reg : should contain the EHCI registers location and length
108    - interrupts : should contain the EHCI interrupt
116    - compatible : should be "nintendo,hollywood-sdhci","sdhci"
117    - reg : should contain the SDHCI registers location and length
118    - interrupts : should contain the SDHCI interrupt
120 1.j) The Inter-Processor Communication (IPC) node
122   Represent the Inter-Processor Communication interface. This interface
125    - compatible : should be "nintendo,hollywood-ipc"
126    - reg : should contain the IPC registers location and length
127    - interrupts : should contain the IPC interrupt
136   - #interrupt-cells : <1>
137   - compatible : should be "nintendo,hollywood-pic"
138   - reg : should contain the controller registers location and length
139   - interrupt-controller
140   - interrupts : should contain the cascade interrupt of the "flipper" pic
144   see Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
154    - compatible : should be "nintendo,hollywood-control"
155    - reg : should contain the control registers location and length
163    - compatible : should be "nintendo,hollywood-di"
164    - reg : should contain the DI registers location and length
165    - interrupts : should contain the DI interrupt