Lines Matching +full:output +full:- +full:enable
3 Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and
4 ../interrupt-controller/interrupts.txt for generic information regarding
12 - compatible: "microchip,pic32mada-pinctrl"
13 - reg: Address range of the pinctrl registers.
14 - clocks: Clock specifier (see clock bindings for details)
16 Required properties for pin configuration sub-nodes:
17 - pins: List of pins to which the configuration applies.
19 Optional properties for pin configuration sub-nodes:
20 ----------------------------------------------------
21 - function: Mux function for the specified pins.
22 - bias-pull-up: Enable weak pull-up.
23 - bias-pull-down: Enable weak pull-down.
24 - input-enable: Set the pin as an input.
25 - output-low: Set the pin as an output level low.
26 - output-high: Set the pin as an output level high.
27 - microchip,digital: Enable digital I/O.
28 - microchip,analog: Enable analog I/O.
33 #address-cells = <1>;
34 #size-cells = <1>;
35 compatible = "microchip,pic32mzda-pinctrl";
40 uart2-tx {
44 output-low;
46 uart2-rx {
50 input-enable;
56 compatible = "microchip,pic32mzda-uart";
58 pinctrl-names = "default";
59 pinctrl-0 = <&pinctrl_uart2>;