Lines Matching +full:vbus +full:- +full:gpios

1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun50i-a64-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Chen-Yu Tsai <wens@csie.org>
11   - Maxime Ripard <mripard@kernel.org>
14   "#phy-cells":
19       - allwinner,sun20i-d1-usb-phy
20       - allwinner,sun50i-a64-usb-phy
24       - description: PHY Control registers
25       - description: PHY PMU0 registers
26       - description: PHY PMU1 registers
28   reg-names:
30       - const: phy_ctrl
31       - const: pmu0
32       - const: pmu1
36       - description: USB OTG PHY bus clock
37       - description: USB Host 0 PHY bus clock
39   clock-names:
41       - const: usb0_phy
42       - const: usb1_phy
46       - description: USB OTG reset
47       - description: USB Host 1 Controller reset
49   reset-names:
51       - const: usb0_reset
52       - const: usb1_reset
54   usb0_id_det-gpios:
58   usb0_vbus_det-gpios:
60     description: GPIO to the USB OTG VBUS detect pin
62   usb0_vbus_power-supply:
63     description: Power supply to detect the USB OTG VBUS
65   usb0_vbus-supply:
66     description: Regulator controlling USB OTG VBUS
68   usb1_vbus-supply:
72   - "#phy-cells"
73   - compatible
74   - clocks
75   - clock-names
76   - reg
77   - reg-names
78   - resets
79   - reset-names
84   - |
85     #include <dt-bindings/gpio/gpio.h>
86     #include <dt-bindings/clock/sun50i-a64-ccu.h>
87     #include <dt-bindings/reset/sun50i-a64-ccu.h>
90         #phy-cells = <1>;
91         compatible = "allwinner,sun50i-a64-usb-phy";
95         reg-names = "phy_ctrl",
100         clock-names = "usb0_phy",
104         reset-names = "usb0_reset",
106         usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
107         usb0_vbus_power-supply = <&usb_power_supply>;
108         usb0_vbus-supply = <&reg_drivevbus>;
109         usb1_vbus-supply = <&reg_usb1_vbus>;