Lines Matching +full:mdio +full:- +full:connected

9 - reg		: Specifies PCIe Device Number and Function
12 - compatible	: Should be "fsl,enetc".
14 1. The ENETC external port is connected to a MDIO configurable phy
16 1.1. Using the local ENETC Port MDIO interface
18 In this case, the ENETC node should include a "mdio" sub-node
19 that in turn should contain the "ethernet-phy" node describing the
26 - phy-handle		: Phandle to a PHY on the MDIO bus.
29 - phy-connection-type	: Defined in ethernet.txt.
31 - mdio			: "mdio" node, defined in mdio.txt.
33 - ethernet-phy		: "ethernet-phy" node, defined in phy.txt.
40 		phy-handle = <&sgmii_phy0>;
41 		phy-connection-type = "sgmii";
43 		mdio {
44 			#address-cells = <1>;
45 			#size-cells = <0>;
46 			sgmii_phy0: ethernet-phy@2 {
52 1.2. Using the central MDIO PCIe endpoint device
54 In this case, the mdio node should be defined as another PCIe
59 - reg		: Specifies PCIe Device Number and Function
62 - compatible	: Should be "fsl,enetc-mdio".
64 The remaining required mdio bus properties are standard, their bindings
65 already defined in Documentation/devicetree/bindings/net/mdio.txt.
72 		phy-handle = <&sgmii_phy0>;
73 		phy-connection-type = "sgmii";
76 	mdio@0,3 {
77 		compatible = "fsl,enetc-mdio";
79 		#address-cells = <1>;
80 		#size-cells = <0>;
81 		sgmii_phy0: ethernet-phy@2 {
86 2. The ENETC port is an internal port or has a fixed-link external
90 as specified by Documentation/devicetree/bindings/net/fixed-link.txt.
94 - fixed-link	: "fixed-link" node, defined in "fixed-link.txt".
100 		fixed-link {
102 			full-duplex;
112 - reg		: Specifies the address in the SoC memory space.
113 - compatible	: Must be "fsl,ls1028a-enetc-ierb".
117 		compatible = "fsl,ls1028a-enetc-ierb";