Lines Matching +full:ecc +full:- +full:size
5 - compatible: Should be "hisilicon,504-nfc".
6 - reg: The first contains base physical address and size of
8 physical address and size of NAND controller's buffer.
9 - interrupts: Interrupt number for nfc.
10 - nand-bus-width: See nand-controller.yaml.
11 - nand-ecc-mode: Support none and hw ecc mode.
12 - #address-cells: Partition address, should be set 1.
13 - #size-cells: Partition size, should be set 1.
17 - nand-ecc-strength: Number of bits to correct per ECC step.
18 - nand-ecc-step-size: Number of data bytes covered by a single ECC step.
20 The following ECC strength and step size are currently supported:
22 - nand-ecc-strength = <16>, nand-ecc-step-size = <1024>
24 Flash chip may optionally contain additional sub-nodes describing partitions of
30 compatible = "hisilicon,504-nfc";
33 nand-bus-width = <8>;
34 nand-ecc-mode = "hw";
35 nand-ecc-strength = <16>;
36 nand-ecc-step-size = <1024>;
37 #address-cells = <1>;
38 #size-cells = <1>;