Lines Matching +full:output +full:- +full:enable

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Antoniu Miclaus <antoniu.miclaus@analog.com>
11   - Dragos Bogdan <dragos.bogdan@analog.com>
14    The ADF4377 is a high performance, ultralow jitter, dual output integer-N
24       - adi,adf4377
25       - adi,adf4378
30   spi-max-frequency:
36   clock-names:
40       - const: ref_in
42   chip-enable-gpios:
44       GPIO that controls the Chip Enable Pin.
47   clk1-enable-gpios:
49       GPIO that controls the Enable Clock 1 Output Buffer Pin.
52   clk2-enable-gpios:
54       GPIO that controls the Enable Clock 2 Output Buffer Pin.
57   adi,muxout-select:
59       On chip multiplexer output selection.
60       high_z - MUXOUT Pin set to high-Z.
61       lock_detect - MUXOUT Pin set to lock detector output.
62       muxout_low - MUXOUT Pin set to low.
63       f_div_rclk_2 - MUXOUT Pin set to fDIV_RCLK/2.
64       f_div_nclk_2 - MUXOUT Pin set to fDIV_NCLK/2.
65       muxout_high - MUXOUT Pin set to high.
69   - compatible
70   - reg
71   - clocks
72   - clock-names
75   - $ref: /schemas/spi/spi-peripheral-props.yaml#
80   - |
82         #address-cells = <1>;
83         #size-cells = <0>;
87             spi-max-frequency = <10000000>;
89             clock-names = "ref_in";