Lines Matching +full:reset +full:- +full:gpio

1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/gpio/gpio-consumer-common.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Common GPIO lines
10   - Bartosz Golaszewski <brgl@bgdev.pl>
11   - Linus Walleij <linus.walleij@linaro.org>
14   Pay attention to using proper GPIO flag (e.g. GPIO_ACTIVE_LOW) for the GPIOs
20   enable-gpios:
23       GPIO connected to the enable control pin.
25   reset-gpios:
27       GPIO (or GPIOs for power sequence) connected to the device reset pin
28       (e.g. RESET or RESETN).
30   powerdown-gpios:
33       GPIO connected to the power down pin (hardware power down or power cut,
36   pwdn-gpios:
38     description: Use powerdown-gpios
41   wakeup-gpios:
44       GPIO connected to the pin waking up the device from suspend or other
45       power-saving modes.
48   - if:
53               - mmc-pwrseq-simple
56         reset-gpios:
61         reset-gpios: