Lines Matching +full:battery +full:- +full:profile
16 - Required: DSDT, FADT, GTDT, MADT, MCFG, RSDP, SPCR, XSDT
18 - Recommended: BERT, EINJ, ERST, HEST, PCCT, SSDT
20 - Optional: AGDI, BGRT, CEDT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT,
24 - Not supported: AEST, APMT, BOOT, DBGP, DMAR, ETDT, HPET, IVRS, LPIT,
41 This table describes a non-maskable event, that is used by the platform
68 Optional, not currently supported, with no real use-case for an
83 time as ARM-compatible hardware is available, and the specification
151 UEFI-based; if it is UEFI-based, this table may be supplied. When this
167 the hardware reduced profile, and only 64-bit address fields will
184 filled in properly - that the PSCI_COMPLIANT flag is set and that
185 PSCI_USE_HVC is set or unset as needed (see table 5-37).
206 ARM-specific error sources have been defined; please use those or the
244 when using GICv3-ITS and an SMMU); on SBSA Level 0 platforms, it
267 should be used (types 0xA - 0xF).
271 **Memory-mapped ConFiGuration space**
333 non-architectural features.
377 Since this table can only provide 32-bit addresses, it is deprecated
382 **Smart Battery Subsystem Table**
504 ------------
514 on arm64 - there are no assumptions made about
524 default to non-coherent, but be made coherent with
540 of C-states.
602 a device-specific method, the process described for
604 out-of-process use of _OSC is not allowed. That is,
605 submit the device-specific _OSC usage description as
626 _PRx 7.3.8-11 Use as needed; power management specific. If _PR0 is
629 _PSx 7.3.2-5 Use as needed; power management specific. If _PS0 is
670 ----------------
672 profile used by arm64. Since there are no GPE blocks defined for use on ARM
675 There are two options: GPIO-signaled interrupts (Section 5.6.5), and
676 interrupt-signaled events (Section 5.6.9). Interrupt-signaled events are a
677 new feature in the ACPI 6.1 specification. Either - or both - can be used
679 given SoC. If possible, interrupt-signaled events are recommended.
683 ----------------------
704 performance control on arm64. C-states and P-states may become available at
715 ----------------------------------
723 -------------------------------------
743 -----------------------------------
748 may not even be a non-ARM implementation yet. Hence, they are not currently
753 - Section 9.2: ambient light sensor devices
755 - Section 9.3: battery devices
757 - Section 9.4: lids (e.g., laptop lids)
759 - Section 9.8.2: IDE controllers
761 - Section 9.9: floppy controllers
763 - Section 9.10: GPE block devices
765 - Section 9.15: PC/AT RTC/CMOS devices
767 - Section 9.16: user presence detection devices
769 - Section 9.17: I/O APIC devices; all GICs must be enumerable via MADT
771 - Section 9.18: time and alarm devices (see 9.15)
773 - Section 10: power source and power meter devices
775 - Section 11: thermal management
777 - Section 12: embedded controllers interface
779 - Section 13: SMBus interfaces