Lines Matching refs:RW
6 (RW) Trackpoint sensitivity.
13 (RW) Negative inertia factor. High values cause the cursor to
21 (RW) Backup range for z-axis press.
28 (RW) The drag hysteresis controls how hard it is to drag with
36 (RW) Minimum amount of force needed to trigger dragging.
43 (RW) Speed of the trackpoint cursor.
50 (RW) Minimum value for z-axis force required to trigger a press
58 (RW) The offset from the running average required to generate a
66 (RW) This attribute determines how sharp a press has to be in
74 (RW) Minimum curvature in degrees required to generate a double
82 (RW) When the skipback bit is set, backup cursor movement during
91 (RW) Disable (0) or enable (1) external pointing device.
98 (RW) Writing a value of 1 to this file will enable the Press to
107 (RW) This parameter controls the period of time to test for a