Lines Matching refs:LED
13 Specifies the duration of the LED blink in milliseconds.
28 If set to 0 (default), the LED's normal state is off.
30 If set to 1, the LED's normal state reflects the link state
32 Setting this value also immediately changes the LED state.
42 If set to 0 (default), the LED will not blink on transmission.
44 If set to 1, the LED will blink for the milliseconds specified
57 If set to 0 (default), the LED will not blink on reception.
59 If set to 1, the LED will blink for the milliseconds specified
70 Communicate whether the LED trigger modes are offloaded to
73 If 0, the LED is using software fallback to blink.
75 If 1, the LED blinking in requested mode is offloaded to
85 If set to 0 (default), the LED's normal state is off.
87 If set to 1, the LED's normal state reflects the link state
89 Setting this value also immediately changes the LED state.
98 If set to 0 (default), the LED's normal state is off.
100 If set to 1, the LED's normal state reflects the link state
102 Setting this value also immediately changes the LED state.
111 If set to 0 (default), the LED's normal state is off.
113 If set to 1, the LED's normal state reflects the link state
115 Setting this value also immediately changes the LED state.
124 If set to 0 (default), the LED's normal state is off.
126 If set to 1, the LED's normal state reflects the link half
128 Setting this value also immediately changes the LED state.
137 If set to 0 (default), the LED's normal state is off.
139 If set to 1, the LED's normal state reflects the link full
141 Setting this value also immediately changes the LED state.