Lines Matching +full:current +full:- +full:speed
16 The contents of the label are free-form.
135 this voltage channel is being used for, and user-space
137 user-space.
145 When disabled the sensor read will return -ENODATA.
147 - 1: Enable
148 - 0: Disable
226 affects the measurable speed range, not the read value.
247 Desired fan speed
253 Only makes sense if the chip supports closed-loop fan speed
254 control based on the measured fan speed.
263 this fan channel is being used for, and user-space doesn't.
264 In all other cases, the label is provided by user-space.
272 When disabled the sensor read will return -ENODATA.
274 - 1: Enable
275 - 0: Disable
283 - 1: Failed
284 - 0: Ok
300 Fan speed control method:
302 - 0: no fan speed control (i.e. fan at full speed)
303 - 1: manual fan speed control enabled (using `pwmY`)
304 - 2+: automatic fan speed control enabled
313 - 0: DC mode (direct current)
314 - 1: PWM mode (pulse-width modulation)
343 Number of trip points is chip-dependent. Use this for chips
354 Number of trip points is chip-dependent. Use this for chips
367 - 1: CPU embedded diode
368 - 2: 3904 transistor
369 - 3: thermal diode
370 - 4: thermistor
371 - 5: AMD AMDSI
372 - 6: Intel PECI
434 - 0: OK
435 - 1: temperature has reached tempY_crit
512 this temperature channel is being used for, and user-space
514 user-space.
550 When disabled the sensor read will return -ENODATA.
552 - 1: Enable
553 - 0: Disable
575 Current max value
583 Current min value.
591 Current critical low value
599 Current critical high value.
607 Current input value
615 Average current use
623 Historical minimum current
631 Historical maximum current
651 When disabled the sensor read will return -ENODATA.
653 - 1: Enable
654 - 0: Disable
660 Minimum rated current.
668 Maximum rated current.
847 -ENODATA.
849 - 1: Enable
850 - 0: Disable
883 -ENODATA.
885 - 1: Enable
886 - 0: Disable
894 Unit: milli-percent (per cent mille, pcm)
904 -ENODATA.
906 - 1: Enable
907 - 0: Disable
915 Unit: milli-percent (per cent mille, pcm)
923 Unit: milli-percent (per cent mille, pcm)
932 - 0: OK
933 - 1: intrusion detected
946 - 0: disable
947 - 1: enable
955 - 0, off, n: disable
956 - 1, on, y: enable