Lines Matching +full:read +full:- +full:1
1 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health
6 0 - health failed, 2 - health OK, 3 - ASIC in booting state.
8 The files are read only.
10 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version
11 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version
18 The files are read only.
20 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir
25 forward direction - relevant bit is set 0;
26 reversed direction - relevant bit is set 1.
28 The files are read only.
30 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
37 The files are read only.
39 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
46 The file is read/write.
48 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
54 Attribute select_iio can be written with 0 or with 1. It
57 The file is read/write.
59 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on
60 /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu2_on
61 /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_cycle
62 /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down
70 When pwr_cycle is written 1: auxiliary power domain will go
71 down and after short period (about 1 second) up.
72 When psu1_on or psu2_on is written 1, related unit will be
73 disconnected from the power source, when written 0 - connected.
74 If both are written 1 - power supplies main power domain will
76 When pwr_down is written 1, system's main power domain will go
81 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_aux_pwr_or_ref
82 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_asic_thermal
83 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_halt
84 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_wd
85 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_fw_reset
86 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_long_pb
87 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_main_pwr_fail
88 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb
89 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset
96 short press power button, software reset. Value 1 in file means
97 this is reset cause, 0 - otherwise. Only one of the above
98 causes could be 1 at the same time, representing only last
101 The files are read only.
103 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_pwr_fail
104 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_comex
105 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system
106 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail
113 Value 1 in file means this is reset cause, 0 - otherwise.
114 Only one bit could be 1 at the same time, representing only
117 The files are read only.
119 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
126 The files are read only.
128 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal
129 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd
130 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic
131 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios
132 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
133 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
141 reload. Value 1 in file means this is reset cause, 0 - otherwise.
142 Only one of the above causes could be 1 at the same time, representing
145 The files are read only.
147 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
148 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
156 The files are read only.
158 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail
159 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform
160 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
161 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
171 The files are read only.
173 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
178 reset, when attribute is set 1.
180 The file is read/write.
182 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
187 protection when attribute is set 1.
189 The file is read/write.
191 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
197 0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
199 The file is read only.
201 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
208 The file is read only.
210 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_pn
211 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_pn
212 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_pn
213 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_pn
214 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version_min
215 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version_min
216 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min
217 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min
225 The files are read only.
227 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_active_image
228 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_auth_fail
229 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_upgrade_fail
236 0: Top, 1: Bottom.
239 top-swap feature of DualBios on the same flash.
248 The files are read only.
250 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_enable
251 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_enable
252 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_enable
253 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_enable
254 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_enable
255 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_enable
256 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_enable
257 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_enable
263 When lc{n}_enable is written 1, related line card is released
264 from the reset state, when 0 - is hold in reset state.
266 The files are read/write.
268 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_pwr
269 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_pwr
270 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_pwr
271 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_pwr
272 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_pwr
273 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_pwr
274 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_pwr
275 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_pwr
281 When lc{n}_pwr is written 1, related line card is powered
282 on, when written 0 - powered off.
284 The files are read/write.
286 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_rst_mask
287 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_rst_mask
288 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_rst_mask
289 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_rst_mask
290 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_rst_mask
291 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_rst_mask
292 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_rst_mask
293 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_rst_mask
300 When lc{n}_rst_mask is written 1, related line card reset bit
301 is cleared, when written 0 - no effect.
305 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/os_started
309 Description: This file, when written 1, indicates to programmable devices
312 The file is read/write.
314 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pm_mgmt_en
324 When pm_mgmt_en is written 1, power management control by
325 software is enabled, 0 - power management control by hardware.
330 at once - hardware will power line cards while system has
334 The file is read/write.
336 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu3_on
337 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu4_on
343 When psu3_on or psu4_on is written 1, related unit will be
344 disconnected from the power source, when written 0 - connected.
348 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/shutdown_unlock
356 1 and then perform system power cycle by setting pwr_cycle
357 attribute to 1 (power cycle of main power domain).
358 Before setting shutdown_unlock to 1 it is recommended to
361 In case shutdown_unlock is not set 1, the only way to release
362 ASIC from locking - is full system power cycle through the
364 Default is 1.
366 The file is read/write.
368 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
369 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
370 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
377 The files are read only.
379 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
380 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
381 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
388 The files are read only.
390 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
395 protection mode. When attribute is set 1 - write protection is
396 disabled, when 0 - enabled.
398 If the system is in locked-down mode writing this file will not
403 The file is read/write.
405 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
406 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
407 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
408 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
409 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
410 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
415 auxiliary outage or power refresh, DC-to-DC power failure, FPGA reset
417 Value 1 in file means this is reset cause, 0 - otherwise. Only one of
418 the above causes could be 1 at the same time, representing only last
421 The files are read only.
423 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
424 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
428 Description: These files allow CPLD and FPGA burning. Value 1 in file means burning
429 is enabled, 0 - otherwise.
430 If the system is in locked-down mode writing these files will
433 upgrade through the JTAG daisy-chain.
435 The files are read/write.
437 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
438 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
443 The attributes are set 1 for power on, 0 - for power off.
445 The files are read/write.
447 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
448 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
453 The attributes are set 1 to enable burning, 0 - to disable.
454 If the system is in locked-down mode writing these files will
459 The file is read/write.
461 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
462 What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon…
469 The files are read only.
471 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/phy_reset
478 When phy_reset is written 1, all PHY 88E1548 are released
479 from the reset state, when 0 - are hold in reset state.
481 The files are read/write.
483 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/mac_reset
490 When mac_reset is written 1, the ASIC MT52132 is released
491 from the reset state, when 0 - is hold in reset state.
493 The files are read/write.
495 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/qsfp_pwr_good
500 when one of any QSFP ports is plugged. The value is set to 1 when
503 0 - Power good, 1 - Not power good.
505 The files are read only.
507 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_health
511 Description: This file shows 2-nd ASIC health status. The possible values are:
512 0 - health failed, 2 - health OK, 3 - ASIC in booting state.
514 The file is read only.
516 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_reset
517 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_reset
521 Description: These files allow to each of ASICs by writing 1.
525 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/comm_chnl_ready
531 For indication the file should be written 1.
535 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config3
543 The file is read only.
545 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_pwr_converter_fail
551 Value 1 in file means this is reset cause, 0 - otherwise.
553 The file is read only.
555 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_ap_reset
556 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_ap_reset
570 The files are read only.
572 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_recovery
573 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_recovery
574 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_reset
575 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_reset
588 For reset/recovery the related file should be toggled by 1/0.
590 The files are read/write.
592 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_wp
593 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_wp
600 If the system is in locked-down mode writing this file will not be allowed.
602 The files are read/write.
604 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/spi_chnl_select
609 device Out-of-Band recovery.
610 File can be written with 0 or with 1. It selects which EROT can be accessed
613 The file is read/write.
615 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_pg_fail
620 Value 1 in file means ASIC Power Good failed, 0 - otherwise.
622 The file is read only.
624 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd1_boot_fail
625 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd2_boot_fail
626 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd_fail
631 - clk_brd1_boot_fail: warning about 1-st clock board failed to boot from CI.
632 - clk_brd2_boot_fail: warning about 2-nd clock board failed to boot from CI.
633 - clk_brd_fail: error about common clock board boot failure.
635 The files are read only.
637 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd_prog_en
643 If the system is in locked-down mode writing this file will not be allowed.
645 The file is read/write.
647 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_converter_prog_en
653 If the system is in locked-down mode writing this file will not be allowed.
655 The file is read/write.
657 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_ok_fail
662 Value 1 in file means this is reset cause, 0 - otherwise.
664 The file is read only.
666 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld5_pn
667 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld5_version
668 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld5_version_min
673 versions have been burned the 5-th CPLD device equipped on a
676 The files are read only.
678 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_cap
685 b00 - field update through LPC bus register memory space.
686 b01 - Reserved.
687 b10 - Reserved.
688 b11 - field update through CPU GPIOs bit-banging.
690 The file is read only.
692 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lid_open
696 Description: 1 - indicates that system lid is opened, otherwise 0.
698 The file is read only.
700 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_long_pwr_pb
704 Description: This file if set 1 indicates that system has been reset by
707 The file is read only.
709 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_dc_dc_pwr_fail
713 Description: This file shows 1 in case the system reset happened due to the
714 failure of any DC-DC power converter devices equipped on the
717 The file is read only.