1 /* SPDX-License-Identifier: GPL-2.0-or-later */
4  * Based on code in sungem_phy.c and (long-removed) gianfar_phy.c
73  * Set phydev->irq to PHY_POLL if interrupts are not supported,
77 #define PHY_POLL		-1
78 #define PHY_MAC_INTERRUPT	-2
86  * enum phy_interface_t - Interface Mode definitions
88  * @PHY_INTERFACE_MODE_NA: Not Applicable - don't touch
90  * @PHY_INTERFACE_MODE_MII: Media-independent interface
91  * @PHY_INTERFACE_MODE_GMII: Gigabit media-independent interface
92  * @PHY_INTERFACE_MODE_SGMII: Serial gigabit media-independent interface
97  * @PHY_INTERFACE_MODE_RGMII: Reduced gigabit media-independent interface
103  * @PHY_INTERFACE_MODE_XGMII: 10 gigabit media-independent interface
104  * @PHY_INTERFACE_MODE_XLGMII:40 gigabit media-independent interface
113  * @PHY_INTERFACE_MODE_XAUI: 10 Gigabit Attachment Unit Interface
114  * @PHY_INTERFACE_MODE_10GBASER: 10G BaseR
116  * @PHY_INTERFACE_MODE_USXGMII:  Universal Serial 10GE MII
117  * @PHY_INTERFACE_MODE_10GKR: 10GBASE-KR - with Clause 73 AN
119  * @PHY_INTERFACE_MODE_1000BASEKX: 1000Base-KX - with Clause 73 AN
151 	/* 10GBASE-R, XFI, SFI - single lane 10G Serdes */
155 	/* 10GBASE-KR - with Clause 73 AN */
197  * phy_supported_speeds - return all speeds currently supported by a PHY device
204  * phy_modes - map phy_interface_t enum to device tree binding of phy-mode
208  * into the device tree binding of 'phy-mode', so that Ethernet
227 		return "rev-mii";  in phy_modes()
231 		return "rev-rmii";  in phy_modes()
235 		return "rgmii-id";  in phy_modes()
237 		return "rgmii-rxid";  in phy_modes()
239 		return "rgmii-txid";  in phy_modes()
255 		return "1000base-x";  in phy_modes()
257 		return "1000base-kx";  in phy_modes()
259 		return "2500base-x";  in phy_modes()
261 		return "5gbase-r";  in phy_modes()
267 		return "10gbase-r";  in phy_modes()
269 		return "25gbase-r";  in phy_modes()
273 		return "10gbase-kr";  in phy_modes()
275 		return "100base-x";  in phy_modes()
284 #define PHY_FORCE_TIMEOUT	10
300  * struct mdio_bus_stats - Statistics counters for MDIO busses
317  * struct phy_package_shared - Shared information in PHY packages
348  * struct mii_bus - Represents an MDIO bus
433  * mdiobus_alloc - Allocate an MDIO bus structure
465  * enum phy_state - PHY state machine states:
470  * - PHY driver probe function will set the state to @PHY_READY
475  * - start will set the state to UP
479  * - timer moves to @PHY_NOLINK or @PHY_RUNNING
482  * - irq or timer will set @PHY_RUNNING if link comes back
483  * - phy_stop moves to @PHY_HALTED
487  * - irq or timer will set @PHY_NOLINK if link goes down
488  * - phy_stop moves to @PHY_HALTED
494  * - phy_stop aborts the running test and moves to @PHY_HALTED
498  * - phy_start moves to @PHY_UP
513  * struct phy_c45_device_ids - 802.3-c45 Device Identifiers
528  * struct phy_device - An instance of a PHY
533  * @c45_ids: 802.3-c45 Device Identifiers if is_c45.
547  * @dev_flags: Device-specific flags used by the PHY driver.
549  *      - Bits [15:0] are free to use by the PHY driver to communicate
551  *      - Bits [23:16] are currently reserved for future use.
552  *      - Bits [31:24] are reserved for defining generic
554  * @irq: IRQ number of the PHY's interrupt (-1 if none)
691 	 * -1 means no interrupt
741  * struct phy_tdr_config - Configuration of a TDR raw test
759 #define PHY_PAIR_ALL -1
762  * struct phy_driver - Driver structure for a particular PHY type
806 	 * up device-specific structures, if any
812 	 * abilities it has.  Should only set phydev->supported.
819 	 * whether to advertise lower-speed modes for that interface. It is
839 	 * autonegotiation if phydev->autoneg is on,
841 	 * if phydev->autoneg is off
872 	 * @set_wol: Some devices (e.g. qnap TS-119P II) require PHY
927 	 * within a plug-in module
933 	 * @module_eeprom: Get the eeprom information from the plug-in
984 #define PHY_ID_MATCH_VENDOR(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 10)
1020  * phy_is_started - Convenience function to check whether PHY is started
1025 	return phydev->state >= PHY_UP;  in phy_is_started()
1033  * phy_read - Convenience function for reading a given PHY register
1043 	return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum);  in phy_read()
1060  * __phy_read - convenience function for reading a given PHY register
1068 	return __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum);  in __phy_read()
1072  * phy_write - Convenience function for writing a given PHY register
1083 	return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val);  in phy_write()
1087  * __phy_write - Convenience function for writing a given PHY register
1096 	return __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum,  in __phy_write()
1101  * __phy_modify_changed() - Convenience function for modifying a PHY register
1115 	return __mdiobus_modify_changed(phydev->mdio.bus, phydev->mdio.addr,  in __phy_modify_changed()
1120  * phy_read_mmd - Convenience function for reading a register
1126  * phy_read_mmd_poll_timeout - Periodically poll a PHY register until a
1135  *            tight-loops).  Should be less than ~20ms since usleep_range
1136  *            is used (see Documentation/timers/timers-howto.rst).
1139  * Returns 0 on success and -ETIMEDOUT upon a timeout. In either
1157  * __phy_read_mmd - Convenience function for reading a register
1163  * phy_write_mmd - Convenience function for writing a register
1169  * __phy_write_mmd - Convenience function for writing a register
1191  * __phy_set_bits - Convenience function for setting bits in a PHY register
1204  * __phy_clear_bits - Convenience function for clearing bits in a PHY register
1218  * phy_set_bits - Convenience function for setting bits in a PHY register
1229  * phy_clear_bits - Convenience function for clearing bits in a PHY register
1240  * __phy_set_bits_mmd - Convenience function for setting bits in a register
1256  * __phy_clear_bits_mmd - Convenience function for clearing bits in a register
1272  * phy_set_bits_mmd - Convenience function for setting bits in a register
1286  * phy_clear_bits_mmd - Convenience function for clearing bits in a register
1300  * phy_interrupt_is_valid - Convenience function for testing a given PHY irq
1308 	return phydev->irq != PHY_POLL && phydev->irq != PHY_MAC_INTERRUPT;  in phy_interrupt_is_valid()
1312  * phy_polling_mode - Convenience function for testing whether polling is
1318 	if (phydev->state == PHY_CABLETEST)  in phy_polling_mode()
1319 		if (phydev->drv->flags & PHY_POLL_CABLE_TEST)  in phy_polling_mode()
1322 	return phydev->irq == PHY_POLL;  in phy_polling_mode()
1326  * phy_has_hwtstamp - Tests whether a PHY time stamp configuration.
1331 	return phydev && phydev->mii_ts && phydev->mii_ts->hwtstamp;  in phy_has_hwtstamp()
1335  * phy_has_rxtstamp - Tests whether a PHY supports receive time stamping.
1340 	return phydev && phydev->mii_ts && phydev->mii_ts->rxtstamp;  in phy_has_rxtstamp()
1344  * phy_has_tsinfo - Tests whether a PHY reports time stamping and/or
1350 	return phydev && phydev->mii_ts && phydev->mii_ts->ts_info;  in phy_has_tsinfo()
1354  * phy_has_txtstamp - Tests whether a PHY supports transmit time stamping.
1359 	return phydev && phydev->mii_ts && phydev->mii_ts->txtstamp;  in phy_has_txtstamp()
1364 	return phydev->mii_ts->hwtstamp(phydev->mii_ts, ifr);  in phy_hwtstamp()
1370 	return phydev->mii_ts->rxtstamp(phydev->mii_ts, skb, type);  in phy_rxtstamp()
1376 	return phydev->mii_ts->ts_info(phydev->mii_ts, tsinfo);  in phy_ts_info()
1382 	phydev->mii_ts->txtstamp(phydev->mii_ts, skb, type);  in phy_txtstamp()
1386  * phy_is_internal - Convenience function for testing if a PHY is internal
1391 	return phydev->is_internal;  in phy_is_internal()
1395  * phy_on_sfp - Convenience function for testing if a PHY is on an SFP module
1400 	return phydev->is_on_sfp_module;  in phy_on_sfp()
1404  * phy_interface_mode_is_rgmii - Convenience function for testing if a
1415  * phy_interface_mode_is_8023z() - does the PHY interface mode use 802.3z
1419  * Returns true if the PHY interface mode uses the 16-bit negotiation
1420  * word as defined in 802.3z. (See 802.3-2015 37.2.1 Config_Reg encoding)
1429  * phy_interface_is_rgmii - Convenience function for testing if a PHY interface
1435 	return phy_interface_mode_is_rgmii(phydev->interface);  in phy_interface_is_rgmii()
1439  * phy_is_pseudo_fixed_link - Convenience function for testing if this
1445 	return phydev->is_pseudo_fixed_link;  in phy_is_pseudo_fixed_link()
1558 	return -EOPNOTSUPP;  in phy_start_cable_test()
1566 	return -EOPNOTSUPP;  in phy_start_cable_test_tdr()
1576 	mdio_device_reset(&phydev->mdio, value);  in phy_device_reset()
1580 	dev_err(&_phydev->mdio.dev, format, ##args)
1583 	dev_err_probe(&_phydev->mdio.dev, err, format, ##args)
1586 	dev_info(&_phydev->mdio.dev, format, ##args)
1589 	dev_warn(&_phydev->mdio.dev, format, ##args)
1592 	dev_dbg(&_phydev->mdio.dev, format, ##args)
1596 	return dev_name(&phydev->mdio.dev);  in phydev_name()
1601 	mutex_lock(&phydev->mdio.bus->mdio_lock);  in phy_lock_mdio_bus()
1606 	mutex_unlock(&phydev->mdio.bus->mdio_lock);  in phy_unlock_mdio_bus()
1682 	if (!phydev->drv)  in phy_read_status()
1683 		return -EIO;  in phy_read_status()
1685 	if (phydev->drv->read_status)  in phy_read_status()
1686 		return phydev->drv->read_status(phydev);  in phy_read_status()
1774 	struct phy_package_shared *shared = phydev->shared;  in phy_package_read()
1777 		return -EIO;  in phy_package_read()
1779 	return mdiobus_read(phydev->mdio.bus, shared->addr, regnum);  in phy_package_read()
1784 	struct phy_package_shared *shared = phydev->shared;  in __phy_package_read()
1787 		return -EIO;  in __phy_package_read()
1789 	return __mdiobus_read(phydev->mdio.bus, shared->addr, regnum);  in __phy_package_read()
1795 	struct phy_package_shared *shared = phydev->shared;  in phy_package_write()
1798 		return -EIO;  in phy_package_write()
1800 	return mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val);  in phy_package_write()
1806 	struct phy_package_shared *shared = phydev->shared;  in __phy_package_write()
1809 		return -EIO;  in __phy_package_write()
1811 	return __mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val);  in __phy_package_write()
1817 	struct phy_package_shared *shared = phydev->shared;  in __phy_package_set_once()
1822 	return !test_and_set_bit(b, &shared->flags);  in __phy_package_set_once()
1857  * phy_module_driver() - Helper macro for registering PHY drivers