Lines Matching +full:four +full:- +full:lane

1 /* SPDX-License-Identifier: GPL-2.0-only */
5  * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd.
24  * struct mipi_dsi_msg - read/write DSI buffer
49  * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format
51  * @header: the four bytes that make up the header (Data ID, Word Count or
67  * struct mipi_dsi_host_ops - DSI bus operations
99  * struct mipi_dsi_host - DSI host device
124 /* enable hsync-end packets in vsync-pulse and v-porch area */
126 /* disable hfront-porch area */
128 /* disable hback-porch area */
130 /* disable hsync-active area */
136 /* device supports non-continuous clock behavior (DSI spec 5.6.1) */
153  * struct mipi_dsi_device_info - template for creating a mipi_dsi_device
168  * struct mipi_dsi_device - DSI peripheral device
176  * @hs_rate: maximum lane frequency for high speed mode in hertz, this should
179  * @lp_rate: maximum lane frequency for low power mode in hertz, this should
198 #define MIPI_DSI_MODULE_PREFIX "mipi-dsi:"
206  * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any
227 	return -EINVAL;  in mipi_dsi_pixel_format_to_bpp()
255  * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode
256  * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking
259  *    V-Blanking and H-Blanking information
301  * mipi_dsi_dcs_write_seq - transmit a DCS command with payload
308 		struct device *dev = &dsi->dev;	\
318  * struct mipi_dsi_driver - DSI driver
339 	return dev_get_drvdata(&dsi->dev);  in mipi_dsi_get_drvdata()
344 	dev_set_drvdata(&dsi->dev, data);  in mipi_dsi_set_drvdata()