Lines Matching +full:frame +full:- +full:buffer
1 # SPDX-License-Identifier: GPL-2.0-only
13 tristate "Support for frame buffer devices"
17 The frame buffer device provides an abstraction for the graphics
18 hardware. It represents the frame buffer of some video hardware and
20 a well-defined interface, so the software doesn't need to know
21 anything about the low-level (hardware register) stuff.
23 Frame buffer devices work identically across the different
26 server exists which uses the frame buffer device exclusively.
27 On several non-X86 architectures, the frame buffer device is the
33 You need an utility program called fbset to make full use of frame
34 buffer devices. Please read <file:Documentation/fb/framebuffer.rst>
35 and the Framebuffer-HOWTO at
36 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
45 (e.g. an accelerated X server) and that are not frame buffer
46 device-aware may cause unexpected results. If unsure, say N.
97 Allow generic frame-buffer functions to work on displays with 1, 2
129 Allow generic frame-buffer to provide get_fb_unmapped_area
137 non-native endianness (e.g. Little-Endian framebuffer on a
138 Big-Endian machine). Most probably you don't have such hardware,
146 bool "Support for Big- and Little-Endian framebuffers"
149 bool "Support for Big-Endian framebuffers only"
152 bool "Support for Little-Endian framebuffers only"
173 Common utility functions useful to fbdev drivers of VGA-based
207 terms of number of tiles in the x- and y-axis.
212 comment "Frame buffer hardware drivers"
234 If you have a PCI-based system, this enables support for these
235 chips: GD-543x, GD-544x, GD-5480.
249 This is the frame buffer device driver for cards based on
256 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
286 will be called amba-clcd.
295 This is the frame buffer device driver for the Acorn VIDC graphics
296 hardware found in Acorn RISC PCs and other ARM-based machines. If
313 bool "SA-1100 LCD support"
319 This is a framebuffer device for the SA-1100 LCD Controller.
320 See <http://www.linux-fbdev.org/> for information on framebuffer
323 If you plan to use the LCD display with your SA-1100 system, say
387 This is the frame buffer device driver for the builtin graphics
426 This is the frame buffer device driver for the Amiga FrameMaster
438 is based on the KS-108 lcd controller and is typically a matrix
452 This is the frame buffer device driver for the builtin graphics
456 bool "Open Firmware frame buffer device support"
475 This driver supports a frame buffer for the graphics adapter in the
486 This driver supports a frame buffer for the "platinum" graphics
497 This driver supports a frame buffer for the "valkyrie" graphics
507 This is the frame buffer device driver for the Chips & Technologies
517 This is the frame buffer device driver for the Asiliant 69030 chipset
525 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
529 tristate "VGA 16-color graphics support"
538 This is the frame buffer device driver for VGA 16 color graphic
545 tristate "HP STI frame buffer device support"
553 BIOS routines contained in a ROM chip in HP PA-RISC based machines.
588 This is the frame buffer device driver for generic TGA and SFB+
589 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
590 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
591 TURBOchannel cards, also known as PMAGD-A, -B and -C.
593 Due to hardware limitations ZLX-E2 and E3 cards are not supported
597 you manage to get it going. ;-)
609 This is the frame buffer driver for generic VBE 2.0 compliant
628 This is the frame buffer device driver for generic VESA 2.0
634 bool "EFI-based Framebuffer Support"
643 This is the EFI frame buffer device driver. If the firmware on
673 bool "SGI Graphics Backend frame buffer support"
680 This is the frame buffer device driver for SGI Graphics Backend.
695 Say Y if you want support for SBUS or UPA based frame buffer device.
704 This is the frame buffer device driver for the BWtwo frame buffer.
713 This is the frame buffer device driver for the CGthree frame buffer.
721 This is the frame buffer device driver for the CGsix (GX, TurboGX)
722 frame buffer.
730 This is the frame buffer device driver for the Creator, Creator3D,
740 This is the frame buffer device driver for the TCX 24/8bit frame
741 buffer.
750 This is the frame buffer device driver for the CGfourteen frame
751 buffer on Desktop SPARCsystems with the SX graphics option.
760 This is the frame buffer device driver for the P9100 card
770 This is the frame buffer device driver for the SBUS-based Sun ZX
771 (leo) frame buffer cards.
774 bool "Sun XVR-500 3DLABS Wildcat support"
780 This is the framebuffer device for the Sun XVR-500 and similar
787 bool "Sun XVR-2500 3DLABS Wildcat support"
793 This is the framebuffer device for the Sun XVR-2500 and similar
800 bool "Sun XVR-1000 support"
806 This is the framebuffer device for the Sun XVR-1000 and similar
901 Because fbdev-2.6 requires that drivers must be able to
947 Because fbdev-2.6 requires that drivers must be able to
987 This driver supports the on-board graphics built in to the Intel 810
1009 monitor is recommended, but can still work with non-compliant ones.
1055 This driver supports the on-board graphics built in to the Intel
1080 Say Y here if you want DDC/I2C support for your on-board Intel graphics.
1139 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
1160 interconnects Matrox optional devices, like MGA-TVO on G200 and
1165 second head of G400 or MGA-TVO on G200 or G400.
1168 i2c-matroxfb.
1177 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1178 head is not compatible with accelerated XFree 3.3.x SVGA servers -
1186 also load i2c-matroxfb to get it to run.
1190 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1216 https://products.amd.com/en-us/GraphicCardResult.aspx
1284 Say Y here to support use of ATI's 64-bit Rage boards (or other
1361 Because fbdev-2.6 requires that drivers must be able to
1382 This is the frame buffer device driver for the SiS 300, 315, 330
1411 This is the frame buffer device driver for Graphics chips of VIA
1478 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1488 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1540 This is the frame buffer device driver for Trident PCI/AGP chipsets.
1574 This is the frame buffer device driver for the 3DLabs Permedia3
1580 tristate "Fujitsu carmine frame buffer support"
1586 This is the frame buffer device driver for the Fujitsu Carmine chip.
1587 The driver provides two independent frame buffer devices.
1641 bool "Wondermedia WM8xxx-series frame buffer support"
1649 This is the framebuffer driver for WonderMedia WM8xxx-series
1663 tristate "HD64461 Frame Buffer support"
1669 This is the frame buffer device driver for the Hitachi HD64461 LCD
1670 frame buffer card.
1673 tristate "PMAG-AA TURBOchannel framebuffer support"
1679 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1680 used mainly in the MIPS-based DECstation series.
1683 tristate "PMAG-BA TURBOchannel framebuffer support"
1689 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1690 used mainly in the MIPS-based DECstation series.
1693 tristate "PMAGB-B TURBOchannel framebuffer support"
1699 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1700 in the MIPS-based DECstation series. The card is currently only
1715 bool "G364 frame buffer support"
1722 Olivetti M700-10 systems.
1725 bool "Motorola 68328 native frame buffer support"
1731 Say Y here if you want to support the built-in frame buffer of
1742 Frame buffer driver for the built-in LCD controller in the Marvell
1754 Frame buffer driver for the built-in LCD controller in the Intel
1810 tristate "W100 frame buffer support"
1816 Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
1837 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1846 Frame buffer driver for the Toshiba Mobile IO integrated as found
1847 on the Sharp SL-6000 series
1869 Frame buffer driver for the built-in FB controller in the Samsung
1893 Frame buffer driver for the built-in LCD controller in the Samsung
1916 Frame buffer driver for the CRT and LCD controllers in the Silicon
1937 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1938 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1953 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1954 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1978 Include support for the virtual frame buffer in the PS3 platform.
1981 int "PS3 default frame buffer size (in MiB)"
1985 This is the default size (in MiB) of the virtual frame buffer in
1991 tristate "Xilinx frame buffer support"
2012 tristate "Cobalt server LCD frame buffer support"
2031 tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
2041 This is the frame buffer device driver for the TI LCD controller
2042 found on DA8xx/OMAP-L1xx/AM335x SoCs.
2046 tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
2053 This is a `virtual' frame buffer device. It operates on a chunk of
2055 board. This means you cannot see any output sent to this frame
2056 buffer device, while it does consume precious memory. The main use
2057 of this frame buffer device is testing and debugging the frame
2058 buffer subsystem. Do NOT enable it for normal systems! To protect
2069 tristate "Xen virtual frame buffer support"
2079 This driver implements the front-end of the Xen virtual
2080 frame buffer driver. It communicates with a back-end
2084 tristate "E-Ink Metronome/8track controller support"
2092 This driver implements support for the E-Ink Metronome
2093 controller. The pre-release name for this device was 8track
2094 and could also have been called by some vendors as PVI-nnnn.
2104 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
2111 bool "Carmine/Coral-P(A) GDC"
2114 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
2133 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
2138 tristate "EP93XX frame buffer support"
2146 ep93xx-fb.
2169 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
2177 This driver implements support for the E-Ink Broadsheet
2183 tristate "Microsoft Hyper-V Synthetic Video support"
2191 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
2202 Say Y if you want support for a simple frame-buffer.
2206 pre-allocated frame buffer surface.
2233 Frame buffer driver for the Silicon Motion SM710, SM712, SM721