Lines Matching +full:arm +full:- +full:firmware +full:- +full:suite
1 # SPDX-License-Identifier: GPL-2.0-only
20 a well-defined interface, so the software doesn't need to know
21 anything about the low-level (hardware register) stuff.
27 On several non-X86 architectures, the frame buffer device is the
35 and the Framebuffer-HOWTO at
36 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
46 device-aware may cause unexpected results. If unsure, say N.
49 bool "Enable firmware EDID"
52 This enables access to the EDID transferred from the firmware.
97 Allow generic frame-buffer functions to work on displays with 1, 2
129 Allow generic frame-buffer to provide get_fb_unmapped_area
137 non-native endianness (e.g. Little-Endian framebuffer on a
138 Big-Endian machine). Most probably you don't have such hardware,
146 bool "Support for Big- and Little-Endian framebuffers"
149 bool "Support for Big-Endian framebuffers only"
152 bool "Support for Little-Endian framebuffers only"
173 Common utility functions useful to fbdev drivers of VGA-based
207 terms of number of tiles in the x- and y-axis.
234 If you have a PCI-based system, this enables support for these
235 chips: GD-543x, GD-544x, GD-5480.
256 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
269 tristate "ARM PrimeCell PL110 support"
270 depends on ARM || ARM64 || COMPILE_TEST
279 This framebuffer device driver is for the ARM PrimeCell PL110
280 Colour LCD controller. ARM PrimeCells provide the building
286 will be called amba-clcd.
290 depends on (FB = y) && ARM && ARCH_ACORN
296 hardware found in Acorn RISC PCs and other ARM-based machines. If
313 bool "SA-1100 LCD support"
314 depends on (FB = y) && ARM && ARCH_SA1100
319 This is a framebuffer device for the SA-1100 LCD Controller.
320 See <http://www.linux-fbdev.org/> for information on framebuffer
323 If you plan to use the LCD display with your SA-1100 system, say
438 is based on the KS-108 lcd controller and is typically a matrix
456 bool "Open Firmware frame buffer device support"
464 Say Y if you want support with Open Firmware for your graphics
525 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
529 tristate "VGA 16-color graphics support"
553 BIOS routines contained in a ROM chip in HP PA-RISC based machines.
589 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
590 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
591 TURBOchannel cards, also known as PMAGD-A, -B and -C.
593 Due to hardware limitations ZLX-E2 and E3 cards are not supported
594 for DECstation 5000/200 systems. Additionally due to firmware
597 you manage to get it going. ;-)
634 bool "EFI-based Framebuffer Support"
643 This is the EFI frame buffer device driver. If the firmware on
770 This is the frame buffer device driver for the SBUS-based Sun ZX
774 bool "Sun XVR-500 3DLABS Wildcat support"
780 This is the framebuffer device for the Sun XVR-500 and similar
782 only works on sparc64 systems where the system firmware has
787 bool "Sun XVR-2500 3DLABS Wildcat support"
793 This is the framebuffer device for the Sun XVR-2500 and similar
795 only works on sparc64 systems where the system firmware has
800 bool "Sun XVR-1000 support"
806 This is the framebuffer device for the Sun XVR-1000 and similar
808 the system firmware has mostly initialized the card already. It
901 Because fbdev-2.6 requires that drivers must be able to
947 Because fbdev-2.6 requires that drivers must be able to
987 This driver supports the on-board graphics built in to the Intel 810
1009 monitor is recommended, but can still work with non-compliant ones.
1055 This driver supports the on-board graphics built in to the Intel
1080 Say Y here if you want DDC/I2C support for your on-board Intel graphics.
1139 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
1160 interconnects Matrox optional devices, like MGA-TVO on G200 and
1165 second head of G400 or MGA-TVO on G200 or G400.
1168 i2c-matroxfb.
1177 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1178 head is not compatible with accelerated XFree 3.3.x SVGA servers -
1186 also load i2c-matroxfb to get it to run.
1190 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1216 https://products.amd.com/en-us/GraphicCardResult.aspx
1284 Say Y here to support use of ATI's 64-bit Rage boards (or other
1361 Because fbdev-2.6 requires that drivers must be able to
1478 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1488 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1630 depends on (FB = y) && ARM && ARCH_VT8500
1641 bool "Wondermedia WM8xxx-series frame buffer support"
1649 This is the framebuffer driver for WonderMedia WM8xxx-series
1673 tristate "PMAG-AA TURBOchannel framebuffer support"
1679 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1680 used mainly in the MIPS-based DECstation series.
1683 tristate "PMAG-BA TURBOchannel framebuffer support"
1689 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1690 used mainly in the MIPS-based DECstation series.
1693 tristate "PMAGB-B TURBOchannel framebuffer support"
1699 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1700 in the MIPS-based DECstation series. The card is currently only
1722 Olivetti M700-10 systems.
1731 Say Y here if you want to support the built-in frame buffer of
1742 Frame buffer driver for the built-in LCD controller in the Marvell
1754 Frame buffer driver for the built-in LCD controller in the Intel
1794 DirectFB suite, see http://www.directfb.org/
1816 Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
1837 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1847 on the Sharp SL-6000 series
1869 Frame buffer driver for the built-in FB controller in the Samsung
1893 Frame buffer driver for the built-in LCD controller in the Samsung
1937 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1938 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1953 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1954 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
2031 tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
2042 found on DA8xx/OMAP-L1xx/AM335x SoCs.
2079 This driver implements the front-end of the Xen virtual
2080 frame buffer driver. It communicates with a back-end
2084 tristate "E-Ink Metronome/8track controller support"
2092 This driver implements support for the E-Ink Metronome
2093 controller. The pre-release name for this device was 8track
2094 and could also have been called by some vendors as PVI-nnnn.
2104 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
2111 bool "Carmine/Coral-P(A) GDC"
2114 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
2133 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
2146 ep93xx-fb.
2169 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
2177 This driver implements support for the E-Ink Broadsheet
2183 tristate "Microsoft Hyper-V Synthetic Video support"
2191 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
2202 Say Y if you want support for a simple frame-buffer.
2206 pre-allocated frame buffer surface.