Lines Matching +full:host +full:- +full:controller
1 # SPDX-License-Identifier: GPL-2.0
3 # USB Host Controller Drivers
5 comment "USB Host Controller Drivers"
11 The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
12 host/peripheral/OTG USB controllers.
14 Enable this option to support this chip in host controller mode.
24 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
25 "SuperSpeed" host controller hardware.
28 module will be called xhci-hcd.
36 sure that your xHCI host supports the extended debug capability and
47 tristate "Support for additional Renesas xHCI controller with firmware"
49 Say 'Y' to enable the support for the Renesas xHCI controller with
58 Adds an xHCI host driver for a generic platform device, which
69 Say 'Y' to enable the support for the xHCI host controller
77 Say 'Y' to enable the support for the xHCI host controller
87 Say 'Y' to enable the support for the xHCI host controller
91 tristate "xHCI support for Renesas R-Car SoCs"
95 Say 'Y' to enable the support for the xHCI host controller
96 found in Renesas R-Car ARM SoCs.
104 Say 'Y' to enable the support for the xHCI host controller
119 Enables support for XHCI, EHCI and OHCI host controllers
123 modules will be called ohci-platform.ko, ehci-brcm.ko and
124 xhci-plat-hcd.ko
133 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
134 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
135 If your USB host controller supports USB 2.0, you will likely want to
136 configure this Host Controller Driver.
138 EHCI controllers are packaged with "companion" host controllers (OHCI
141 connect to a companion controller. If you configure EHCI, you should
142 probably configure the OHCI (for NEC and some other vendors) USB Host
143 Controller Driver or UHCI (for Via motherboards) Host Controller
149 module will be called ehci-hcd.
155 Some EHCI chips have vendor-specific extensions to integrate
157 controller is needed. It's safe to say "y" even if your
158 controller doesn't support this feature.
175 highspeed USB hub which is connected to a highspeed USB Host
176 Controller, and some of those devices will not work correctly
177 (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if
191 bool "Use Xilinx usb host EHCI controller core"
196 Xilinx xps USB host controller core is EHCI compliant and has
197 transaction translator built-in. It can be configured to either
202 tristate "Support for Freescale on-chip EHCI USB controller"
208 tristate "Support for Nuvoton NPCM on-chip EHCI USB controller"
212 Enables support for the on-chip EHCI controller on
221 Enables support for the on-chip EHCI controller on
225 tristate "Support for Marvell EBU on-chip EHCI USB controller"
229 Enables support for the on-chip EHCI controller on Marvell's
233 Marvell PXA/MMP USB controller" for those.
236 tristate "Support for ST SPEAr on-chip EHCI USB controller"
240 Enables support for the on-chip EHCI controller on
244 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
249 Enable support for the on-chip EHCI controller found on
253 tristate "Support for Atmel on-chip EHCI USB controller"
257 Enables support for the on-chip EHCI controller on
271 Enable support for the internal USB Host Controllers
275 bool "EHCI support for PPC USB controller on OF platform bus"
279 Enables support for the USB controller present on the PowerPC
283 bool "EHCI support for SuperH USB controller"
286 Enables support for the on-chip EHCI controller on the SuperH.
287 If you use the PCI EHCI controller, this option is not necessary.
293 Enable support for the Samsung S5Pv210 and Exynos SOC's on-chip EHCI
294 controller.
297 tristate "EHCI support for Marvell PXA/MMP USB controller"
301 Enables support for Marvell (including PXA and MMP series) on-chip
302 USB SPH and OTG controller. SPH is a single port host, and it can
303 only be EHCI host. OTG is controller that can switch to host mode.
305 controller used by the EBU-type SoCs including Orion, Kirkwood,
307 on-chip EHCI USB controller" for those.
313 This driver supports USB host controller on some Cavium
317 will be called octeon-hcd.
327 Enable support for the CNS3XXX SOC's on-chip EHCI controller.
328 It is needed for high-speed (480Mbit/sec) USB 2.0 device
334 Adds an EHCI host driver for a generic platform device, which
340 bool "Octeon on-chip EHCI support (DEPRECATED)"
348 Enable support for the Octeon II SOC's on-chip EHCI
349 controller. It is needed for high-speed (480Mbit/sec)
359 The OXU210HP is an USB host/OTG/device controller. Enable this
366 module will be called oxu210hp-hcd.
372 The ISP1160 and ISP1161 chips are USB host controllers. Enable this
378 module will be called isp116x-hcd.
385 Supports the Philips ISP1362 chip as a host controller
390 module will be called isp1362-hcd.
396 Faraday FOTG210 is an OTG controller which can be configured as
397 an USB2.0 host. It is designed to meet USB2.0 EHCI specification
401 module will be called fotg210-hcd.
404 tristate "MAX3421 HCD (USB-over-SPI) support"
407 The Maxim MAX3421E chip supports standard USB 2.0-compliant
408 full-speed devices either in host or peripheral mode. This
409 driver supports the host-mode of the MAX3421E only.
412 be called max3421-hcd.
418 The Open Host Controller Interface (OHCI) is a standard for accessing
419 USB 1.1 host controller hardware. It does more in hardware than Intel's
420 UHCI specification. If your USB host controller follows the OHCI spec,
421 say Y. On most non-x86 systems, and on x86 hardware that's not using a
422 USB controller from Intel or VIA, this is appropriate. If your host
423 controller doesn't use PCI, this is probably appropriate. For a PCI
424 based system where you're not sure, the "lspci -v" entry will list the
425 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
428 module will be called ohci-hcd.
438 Enables support for the OHCI controller on OMAP1/2 chips.
441 tristate "Support for ST SPEAr on-chip OHCI USB controller"
445 Enables support for the on-chip OHCI controller on
449 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
454 Enable support for the on-chip OHCI controller found on
462 Enables support for the on-chip OHCI controller on
466 tristate "Support for LPC on-chip OHCI USB controller"
472 Enables support for the on-chip OHCI controller on
476 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
480 Enables support for the on-chip OHCI controller on
484 tristate "Support for Atmel on-chip OHCI USB controller"
488 Enables support for the on-chip OHCI controller on
500 Enables support for the on-chip OHCI controller on
511 controller. This driver cannot currently be a loadable
520 Enables support for big-endian USB controllers present on the
528 Enables support for little-endian USB controllers present on the
537 tristate "OHCI support for PCI-bus USB controllers"
542 Enables support for PCI-bus plug-in USB controller cards.
563 bool "OHCI support for SuperH USB controller (DEPRECATED)"
570 Enables support for the on-chip OHCI controller on the SuperH.
571 If you use the PCI OHCI controller, this option is not necessary.
577 Enable support for the Samsung S5Pv210 and Exynos SOC's on-chip OHCI
578 controller.
588 Enable support for the CNS3XXX SOC's on-chip OHCI controller.
589 It is needed for low-speed USB 1.0 device support.
594 Adds an OHCI host driver for a generic platform device, which
600 bool "Octeon on-chip OHCI support (DEPRECATED)"
610 Enable support for the Octeon II SOC's on-chip OHCI
611 controller. It is needed for low-speed USB 1.0 device
620 The Universal Host Controller Interface is a standard by Intel for
622 host controller). If your USB host controller conforms to this
627 133) and LEON/GRLIB SoCs with the GRUSBHC controller.
631 module will be called uhci-hcd.
646 tristate "Freescale QE USB Host Controller support"
651 This driver enables support for Freescale QE USB Host Controller
656 bool "Freescale QE USB Host Controller debug support"
663 tristate "Elan U132 Adapter Host Controller"
667 for PC cards that contain an OHCI host controller. Typical PC cards
670 controller.
675 The driver consists of two modules, the "ftdi-elan" module is a
677 USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
678 controller driver that talks to the OHCI controller within the
693 The SL811HS is a single-port USB controller that supports either
694 host side or peripheral side roles. Enable this option if your
695 board has this chip, and you want to use it as a host controller.
699 module will be called sl811-hcd.
716 REX-CFU1U CF card (often used with PDAs). If unsure, say N.
725 The R8A66597 is a USB 2.0 host and peripheral controller.
728 to use it as a host controller. If unsure, say N.
731 module will be called r8a66597-hcd.
737 The Renesas USBHS is a USB 2.0 host and peripheral controller.
740 to use it as a host controller. If unsure, say N.
743 module will be called renesas-usbhs.
746 tristate "BCMA usb host driver"
751 Enable support for the EHCI and OCHI host controller on an bcma bus.
758 tristate "SSB usb host driver"
763 Enable support for the EHCI and OCHI host controller on an bcma bus.
773 supported by the host controller drivers.
775 One such test mode is the Embedded High-speed Host Electrical Test
776 (EHSET) for EHCI host controller hardware, specifically the "Single
777 Step Set Feature" test. Typically this will be enabled for On-the-Go
778 or embedded hosts that need to undergo USB-IF compliance testing with
787 tristate "Xen usb virtual host driver"
791 The Xen usb virtual host driver serves as a frontend driver enabling
793 by the Xen host (usually Dom0).