Lines Matching full:controller
3 # USB Host Controller Drivers
5 comment "USB Host Controller Drivers"
14 Enable this option to support this chip in host controller mode.
24 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
25 "SuperSpeed" host controller hardware.
47 tristate "Support for additional Renesas xHCI controller with firmware"
49 Say 'Y' to enable the support for the Renesas xHCI controller with
69 Say 'Y' to enable the support for the xHCI host controller
77 Say 'Y' to enable the support for the xHCI host controller
87 Say 'Y' to enable the support for the xHCI host controller
95 Say 'Y' to enable the support for the xHCI host controller
104 Say 'Y' to enable the support for the xHCI host controller
133 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
134 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
135 If your USB host controller supports USB 2.0, you will likely want to
136 configure this Host Controller Driver.
141 connect to a companion controller. If you configure EHCI, you should
143 Controller Driver or UHCI (for Via motherboards) Host Controller
157 controller is needed. It's safe to say "y" even if your
158 controller doesn't support this feature.
176 Controller, and some of those devices will not work correctly
191 bool "Use Xilinx usb host EHCI controller core"
196 Xilinx xps USB host controller core is EHCI compliant and has
202 tristate "Support for Freescale on-chip EHCI USB controller"
208 tristate "Support for Nuvoton NPCM on-chip EHCI USB controller"
212 Enables support for the on-chip EHCI controller on
221 Enables support for the on-chip EHCI controller on
225 tristate "Support for Marvell EBU on-chip EHCI USB controller"
229 Enables support for the on-chip EHCI controller on Marvell's
233 Marvell PXA/MMP USB controller" for those.
236 tristate "Support for ST SPEAr on-chip EHCI USB controller"
240 Enables support for the on-chip EHCI controller on
244 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
249 Enable support for the on-chip EHCI controller found on
253 tristate "Support for Atmel on-chip EHCI USB controller"
257 Enables support for the on-chip EHCI controller on
275 bool "EHCI support for PPC USB controller on OF platform bus"
279 Enables support for the USB controller present on the PowerPC
283 bool "EHCI support for SuperH USB controller"
286 Enables support for the on-chip EHCI controller on the SuperH.
287 If you use the PCI EHCI controller, this option is not necessary.
294 controller.
297 tristate "EHCI support for Marvell PXA/MMP USB controller"
302 USB SPH and OTG controller. SPH is a single port host, and it can
303 only be EHCI host. OTG is controller that can switch to host mode.
305 controller used by the EBU-type SoCs including Orion, Kirkwood,
307 on-chip EHCI USB controller" for those.
313 This driver supports USB host controller on some Cavium
327 Enable support for the CNS3XXX SOC's on-chip EHCI controller.
349 controller. It is needed for high-speed (480Mbit/sec)
359 The OXU210HP is an USB host/OTG/device controller. Enable this
385 Supports the Philips ISP1362 chip as a host controller
396 Faraday FOTG210 is an OTG controller which can be configured as
418 The Open Host Controller Interface (OHCI) is a standard for accessing
419 USB 1.1 host controller hardware. It does more in hardware than Intel's
420 UHCI specification. If your USB host controller follows the OHCI spec,
422 USB controller from Intel or VIA, this is appropriate. If your host
423 controller doesn't use PCI, this is probably appropriate. For a PCI
425 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
438 Enables support for the OHCI controller on OMAP1/2 chips.
441 tristate "Support for ST SPEAr on-chip OHCI USB controller"
445 Enables support for the on-chip OHCI controller on
449 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
454 Enable support for the on-chip OHCI controller found on
462 Enables support for the on-chip OHCI controller on
466 tristate "Support for LPC on-chip OHCI USB controller"
472 Enables support for the on-chip OHCI controller on
476 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
480 Enables support for the on-chip OHCI controller on
484 tristate "Support for Atmel on-chip OHCI USB controller"
488 Enables support for the on-chip OHCI controller on
500 Enables support for the on-chip OHCI controller on
511 controller. This driver cannot currently be a loadable
542 Enables support for PCI-bus plug-in USB controller cards.
563 bool "OHCI support for SuperH USB controller (DEPRECATED)"
570 Enables support for the on-chip OHCI controller on the SuperH.
571 If you use the PCI OHCI controller, this option is not necessary.
578 controller.
588 Enable support for the CNS3XXX SOC's on-chip OHCI controller.
611 controller. It is needed for low-speed USB 1.0 device
620 The Universal Host Controller Interface is a standard by Intel for
622 host controller). If your USB host controller conforms to this
627 133) and LEON/GRLIB SoCs with the GRUSBHC controller.
646 tristate "Freescale QE USB Host Controller support"
651 This driver enables support for Freescale QE USB Host Controller
656 bool "Freescale QE USB Host Controller debug support"
663 tristate "Elan U132 Adapter Host Controller"
667 for PC cards that contain an OHCI host controller. Typical PC cards
670 controller.
678 controller driver that talks to the OHCI controller within the
693 The SL811HS is a single-port USB controller that supports either
695 board has this chip, and you want to use it as a host controller.
725 The R8A66597 is a USB 2.0 host and peripheral controller.
728 to use it as a host controller. If unsure, say N.
737 The Renesas USBHS is a USB 2.0 host and peripheral controller.
740 to use it as a host controller. If unsure, say N.
751 Enable support for the EHCI and OCHI host controller on an bcma bus.
763 Enable support for the EHCI and OCHI host controller on an bcma bus.
773 supported by the host controller drivers.
776 (EHSET) for EHCI host controller hardware, specifically the "Single