Lines Matching full:usb
3 # USB Host Controller Drivers
5 comment "USB Host Controller Drivers"
12 host/peripheral/OTG USB controllers.
21 tristate "xHCI HCD (USB 3.0) support"
24 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
113 tristate "Broadcom STB USB support"
130 tristate "EHCI HCD (USB 2.0) support"
133 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
135 If your USB host controller supports USB 2.0, you will likely want to
139 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
142 probably configure the OHCI (for NEC and some other vendors) USB Host
146 You may want to read <file:Documentation/usb/ehci.rst>.
170 (TT) in USB 2.0 hubs. Without this, only one transfer will be
175 highspeed USB hub which is connected to a highspeed USB Host
191 bool "Use Xilinx usb host EHCI controller core"
196 Xilinx xps USB host controller core is EHCI compliant and has
202 tristate "Support for Freescale on-chip EHCI USB controller"
205 Variation of ARC USB block used in some Freescale chips.
208 tristate "Support for Nuvoton NPCM on-chip EHCI USB controller"
225 tristate "Support for Marvell EBU on-chip EHCI USB controller"
233 Marvell PXA/MMP USB controller" for those.
236 tristate "Support for ST SPEAr on-chip EHCI USB controller"
244 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
253 tristate "Support for Atmel on-chip EHCI USB controller"
271 Enable support for the internal USB Host Controllers
275 bool "EHCI support for PPC USB controller on OF platform bus"
279 Enables support for the USB controller present on the PowerPC
283 bool "EHCI support for SuperH USB controller"
297 tristate "EHCI support for Marvell PXA/MMP USB controller"
302 USB SPH and OTG controller. SPH is a single port host, and it can
307 on-chip EHCI USB controller" for those.
310 tristate "Cavium Networks Octeon USB support"
311 depends on CAVIUM_OCTEON_SOC && USB
313 This driver supports USB host controller on some Cavium
328 It is needed for high-speed (480Mbit/sec) USB 2.0 device
350 USB 2.0 device support. All CN6XXX based chips with USB are
359 The OXU210HP is an USB host/OTG/device controller. Enable this
363 implement OTG nor USB device controllers.
372 The ISP1160 and ISP1161 chips are USB host controllers. Enable this
394 depends on USB && HAS_DMA && HAS_IOMEM
404 tristate "MAX3421 HCD (USB-over-SPI) support"
405 depends on USB && SPI
407 The Maxim MAX3421E chip supports standard USB 2.0-compliant
415 tristate "OHCI HCD (USB 1.1) support"
419 USB 1.1 host controller hardware. It does more in hardware than Intel's
420 UHCI specification. If your USB host controller follows the OHCI spec,
422 USB controller from Intel or VIA, this is appropriate. If your host
425 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
441 tristate "Support for ST SPEAr on-chip OHCI USB controller"
449 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
466 tristate "Support for LPC on-chip OHCI USB controller"
476 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
484 tristate "Support for Atmel on-chip OHCI USB controller"
520 Enables support for big-endian USB controllers present on the
528 Enables support for little-endian USB controllers present on the
537 tristate "OHCI support for PCI-bus USB controllers"
542 Enables support for PCI-bus plug-in USB controller cards.
555 Broadcom USB OHCI core.
563 bool "OHCI support for SuperH USB controller (DEPRECATED)"
589 It is needed for low-speed USB 1.0 device support.
611 controller. It is needed for low-speed USB 1.0 device
612 support. All CN6XXX based chips with USB are supported.
621 accessing the USB hardware in the PC (which is also called the USB
622 host controller). If your USB host controller conforms to this
646 tristate "Freescale QE USB Host Controller support"
651 This driver enables support for Freescale QE USB Host Controller
653 Full and Low Speed USB.
656 bool "Freescale QE USB Host Controller debug support"
666 The U132 adapter is a USB to CardBus adapter specifically designed
676 USB client driver that interfaces to the FTDI chip within ELAN's
677 USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
681 This driver has been tested with a CardBus OHCI USB adapter, and
682 worked with a USB PEN Drive inserted into the first USB port of
693 The SL811HS is a single-port USB controller that supports either
725 The R8A66597 is a USB 2.0 host and peripheral controller.
737 The Renesas USBHS is a USB 2.0 host and peripheral controller.
746 tristate "BCMA usb host driver"
758 tristate "SSB usb host driver"
778 or embedded hosts that need to undergo USB-IF compliance testing with
783 their USB hardware designs. It is not needed for normal use. If
787 tristate "Xen usb virtual host driver"
791 The Xen usb virtual host driver serves as a frontend driver enabling
792 a Xen guest system to access USB Devices passed through to the guest
795 access to a USB device is needed.