Lines Matching full:you
26 This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
27 an Integrator/AP or Integrator/PP2 platform, or if you have a
37 Say Y here if you wish to use an AMBA PrimeCell UART as the system
41 Even if you say Y here, the currently visible framebuffer console
43 you can alter that using a kernel command line option such as
53 This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
65 Say Y here if you wish to use an AMBA PrimeCell UART as the system
69 Even if you say Y here, the currently visible framebuffer console
71 you can alter that using a kernel command line option such as
121 If you say Y here, it will be possible to use a serial port as the
145 Say Y here if you wish to use an on-chip UART on a Atmel
155 Say Y here if you wish to use the PDC to do DMA transfers to
169 Say Y here if you wish to have the internal AT91 UARTs
172 64). This is necessary if you also want other UARTs, such as
177 To use this, you should create suitable ttyATn device nodes in
180 Say Y if you have an external 8250/16C550 UART. If unsure, say N.
186 This special driver allows you to temporary use NMI debugger port
189 Unlike KDB's disable_nmi command, with this driver you are always
195 communication methods, for things like PPP you still must fully
215 Say Y here if you wish to use a Amlogic MesonX UART as the
234 Even if you say Y here, the currently visible virtual console
236 you can alter that using a kernel command line option such as
248 Choose Y/M here only if you build for such SoC.
275 Even if you say Y here, the currently visible virtual console
277 you can alter that using a kernel command line option such as
309 If you say Y here, it will be possible to use a the Tegra TCU as the
335 Say Y here if you want to support this ICs.
352 If you say Y here, it will be possible to use a serial port as the
382 If you say Y here, it will be possible to use a serial port as the
397 If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
398 PCI bridge you can enable its onboard serial port by enabling this
406 If you have enabled the serial port on the 21285 footbridge you can
409 Even if you say Y here, the currently visible virtual console
411 you can alter that using a kernel command line option such as
423 If you have a machine based on an Intel XScale PXA2xx CPU you
426 Unless you have a specific need, you should use SERIAL_8250_PXA
439 If you have enabled the serial port on the Intel XScale PXA
440 CPU you can make it the console by answering Y to this option.
442 Even if you say Y here, the currently visible virtual console
444 you can alter that using a kernel command line option such as
449 Unless you have a specific need, you should use SERIAL_8250_PXA
458 If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
468 If you have enabled the serial port on the SA1100/SA1110 StrongARM
469 CPU you can make it the console by answering Y to this option.
471 Even if you say Y here, the currently visible virtual console
473 you can alter that using a kernel command line option such as
485 If you have a machine based on a Motorola IMX CPU you
493 If you have enabled the serial port on the Freescale IMX
494 CPU you can make it the console by answering Y/M to this option.
496 Even if you say Y/M here, the currently visible virtual console
498 you can alter that using a kernel command line option such as
511 If you have enabled the earlycon on the Freescale IMX
512 CPU you can make it the earlycon by answering Y to this option.
519 Say Y here if you want to use the Xilinx uartlite serial controller.
530 Say Y here if you wish to use a Xilinx uartlite as the system
541 you think you might implement.
555 systems. Say Y or M if you want to be able to these serial ports.
561 If you would like to be able to use the Zilog8530 serial port
562 on your Sparc system as the console, you can do so by answering
570 mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
577 If you would like to be able to use the SU serial port
578 on your Sparc system as the console, you can do so by answering
596 3. Add device ttyB0 to /etc/securetty (if you want to log on as
611 (PCI) UltraSPARC systems. Say Y or M if you want to be able to these
618 If you would like to be able to use the SAB82532 serial port
619 on your Sparc system as the console, you can do so by answering
627 systems. Say Y if you want to be able to use this device.
635 systems. Say Y or M if you want to be able to these serial ports.
691 If you would like to be able to use one of the high speed serial
692 ports on the LPC32XX as the console, you can do so by answering
716 This setting lets you define what the default baudrate is for the
734 Say Y or M if you want to be able to these serial ports.
743 the two drivers being unable to coexist; you could not use
753 If you enable this option, any z85c30 ports in the system will
754 be registered as ttyS0 onwards as in the past, and you will be
758 Say N unless you need the z85c30 ports on your (Power)Mac
766 If you would like to be able to use the z85c30 serial port
767 on your (Power)Mac as the console, you can do so by answering
783 Say Y here if you wish to use a SCC or SMC CPM UART as the system
787 Even if you say Y here, the currently visible framebuffer console
789 you can alter that using a kernel command line option such as
799 If you have a PIC32, this driver supports the serial ports.
810 If you have a PIC32, this driver supports the putting a console on one
820 This driver supports MPC52xx and MPC512x PSC serial ports. If you would
821 like to use them, you must answer Y or M to this option. Note that
830 Select this options if you'd like to use one of the PSC serial port
885 of cards which provide multiple serial ports. You would need
890 If you have a card like this, say Y here, otherwise say N.
936 If you have a machine based on an Texas Instruments OMAP CPU you
939 By enabling this option you take advantage of dma feature available
948 Select this option if you would like to use omap serial port as
951 Even if you say Y here, the currently visible virtual console
953 you can alter that using a kernel command line option such as
963 Select this option if you are building a kernel for a device that
973 Select this option if you would like to use a SiFive UART as the
976 Even if you say Y here, the currently visible virtual console
978 you can alter that using a kernel command line option such as
998 Select this option if you would like to use a Lantiq UART as the
1048 You must select at least one bus for the driver to be built.
1060 You must select at least one bus for the driver to be built.
1089 If you have enabled the serial port on the BCM63xx CPU
1090 you can make it the console by answering Y to this option.
1139 This setting lets you define the maximum number of the Altera
1148 This setting lets you define what the default baudrate is for the
1181 Say Y here if you wish to use the PCH UART as the system console
1223 If you have an Atheros AR933X SOC based board and want to use the
1241 Set this to the number of serial ports you want the driver
1278 Set this to the number of serial ports you want the driver
1294 If you want to compile this driver into the kernel, say Y here. If
1295 you don't have a suitable RocketPort card installed, say N.
1318 If you have enabled the lpuart serial port on the Freescale SoCs,
1319 you can make it the console by answering Y to this option.
1334 If you have enabled the LINFlexD UART serial port on the Freescale
1335 SoCs, you can make it the console by answering Y to this option.
1349 If you have enabled the USART serial port on Conexant Digicolor
1350 SoCs, you can make it the console by answering Y to this option.
1423 This driver is for Marvell EBU SoC's UART. If you have a machine
1436 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1447 Say 'Y' here if you wish to use the on-board serial port.
1457 Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART
1466 Say 'Y' here if you wish to use the on-board serial port.
1476 Say 'Y' here if you wish to use the RDA8810PL UART as the system
1500 Say 'Y' here if you wish to use a USIO/UART of Socionext Milbeaut
1515 Say 'Y' or 'M' here if you wish to use the LiteUART serial controller.
1523 Set this to the maximum number of serial ports you want the driver
1532 Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial
1543 Select this option if you would like to use Sunplus serial port on
1545 If you enable this option, Sunplus serial ports in the system will
1556 Select this option if you would like to use a Sunplus UART as the
1558 Even if you say Y here, the currently visible virtual console
1560 you can alter that using a kernel command line option such as