Lines Matching full:ports

162 	  properly when DMA is enabled. Make sure that ports where
247 	  these ports, depending on how the serial port pins are configured.
263 	  Select the number of available UART ports for the Samsung S3C
272 	  Allow selection of the S3C24XX on-board serial ports for use as
289 	  provide all of these ports, depending on how the serial port
369 	  for serial ports in newer DECstation systems.  These include the
424 	  can enable its onboard serial ports by enabling this option.
535 	int "Maximum number of uartlite serial ports"
554 	  This driver supports the Zilog8530 serial ports found on many Sparc
555 	  systems.  Say Y or M if you want to be able to these serial ports.
569 	  This driver supports the 8250 serial ports that run the keyboard and
571 	  to these serial ports.
610 	  This driver supports the Siemens SAB82532 DUSCC serial ports on newer
612 	  serial ports.
634 	  This driver supports the Zilog8530 serial ports found on SGI
635 	  systems.  Say Y or M if you want to be able to these serial ports.
649 	int "Maximum number of SCI(F) serial ports" if EXPERT
681 	  Support for the LPC32XX high speed serial ports (up to 900kbps).
692 	  ports on the LPC32XX as the console, you can do so by answering
709 	  This serial driver supports the Freescale Coldfire serial ports.
712 	int "Default baudrate for Coldfire serial ports"
717 	  ColdFire serial ports. The usual default varies from board to board,
732 	  This driver supports the Zilog z85C30 serial ports found on
734 	  Say Y or M if you want to be able to these serial ports.
744 	  both z85C30 and 8250 type ports at the same time.
750 	  access the built-in serial ports on powermacs will need to
753 	  If you enable this option, any z85c30 ports in the system will
758 	  Say N unless you need the z85c30 ports on your (Power)Mac
775 	  This driver supports the SCC and SMC serial ports on Motorola 
799 	  If you have a PIC32, this driver supports the serial ports.
801 	  Say Y or M to use PIC32 serial ports, otherwise say N. Note that
811 	  of the serial ports.
820 	  This driver supports MPC52xx and MPC512x PSC serial ports. If you would
866 	int "Maximum number of TMPTX39XX/49XX SIO ports"
885 	  of cards which provide multiple serial ports. You would need
937 	  can enable its onboard serial ports by enabling this option.
1007 	  This driver supports the QE serial ports on Freescale embedded
1023 	  Support for console on SCCNXP serial ports.
1033 	  This selects support for SC16IS7xx serial ports.
1135 	int "Maximum number of Altera UART ports"
1140 	  UART ports. The usual default varies from board to board, and
1144 	int "Default baudrate for Altera UART ports"
1149 	  Altera UART ports. The usual default varies from board to board,
1237 	int "Maximum number of AR933X serial ports"
1241 	  Set this to the number of serial ports you want the driver
1255 	  This driver support the UART ports on ARM MPS2.
1273 	int "Number of ARC UART ports"
1278 	  Set this to the number of serial ports you want the driver
1298 	int "Maximum number of RocketPort EXPRESS/INFINITY ports"
1302 	  If multiple cards are present, the default limit of 32 ports may
1488 	int "Maximum number of CSIO/UART ports (1-8)"
1519 	int "Maximum number of LiteUART ports"
1523 	  Set this to the maximum number of serial ports you want the driver
1545 	  If you enable this option, Sunplus serial ports in the system will