1 // SPDX-License-Identifier: GPL-2.0+
62  * to the host on the Host <-> BMC LPC bus. It could be different on a
68 	return readb(vuart->port->port.membase + reg);  in aspeed_vuart_readb()
73 	writeb(val, vuart->port->port.membase + reg);  in aspeed_vuart_writeb()
91 		return -EINVAL;  in aspeed_vuart_set_lpc_address()
135 		return -EINVAL;  in aspeed_vuart_set_sirq()
251 	struct aspeed_vuart *vuart = uart_8250_port->port.private_data;  in aspeed_vuart_startup()
266 	struct aspeed_vuart *vuart = uart_8250_port->port.private_data;  in aspeed_vuart_shutdown()
278 	up->ier &= ~irqs;  in __aspeed_vuart_set_throttle()
280 		up->ier |= irqs;  in __aspeed_vuart_set_throttle()
281 	serial_out(up, UART_IER, up->ier);  in __aspeed_vuart_set_throttle()
288 	spin_lock_irqsave(&port->lock, flags);  in aspeed_vuart_set_throttle()
290 	spin_unlock_irqrestore(&port->lock, flags);  in aspeed_vuart_set_throttle()
306 	struct uart_8250_port *up = vuart->port;  in aspeed_vuart_unthrottle_exp()
308 	if (!tty_buffer_space_avail(&up->port.state->port)) {  in aspeed_vuart_unthrottle_exp()
309 		mod_timer(&vuart->unthrottle_timer,  in aspeed_vuart_unthrottle_exp()
314 	aspeed_vuart_unthrottle(&up->port);  in aspeed_vuart_unthrottle_exp()
318  * Custom interrupt handler to manage finer-grained flow control. Although we
340 	spin_lock_irqsave(&port->lock, flags);  in aspeed_vuart_handle_irq()
345 		space = tty_buffer_space_avail(&port->state->port);  in aspeed_vuart_handle_irq()
349 			struct aspeed_vuart *vuart = port->private_data;  in aspeed_vuart_handle_irq()
352 			if (!timer_pending(&vuart->unthrottle_timer))  in aspeed_vuart_handle_irq()
353 				mod_timer(&vuart->unthrottle_timer,  in aspeed_vuart_handle_irq()
362 				if (--count == 0)  in aspeed_vuart_handle_irq()
366 			tty_flip_buffer_push(&port->state->port);  in aspeed_vuart_handle_irq()
388 		dev_warn(vuart->dev,  in aspeed_vuart_auto_configure_sirq_polarity()
389 			 "could not get regmap for aspeed,sirq-polarity-sense\n");  in aspeed_vuart_auto_configure_sirq_polarity()
393 		dev_warn(vuart->dev, "could not read hw strap table\n");  in aspeed_vuart_auto_configure_sirq_polarity()
408 		return -EINVAL;  in aspeed_vuart_map_irq_polarity()
422 	np = pdev->dev.of_node;  in aspeed_vuart_probe()
424 	vuart = devm_kzalloc(&pdev->dev, sizeof(*vuart), GFP_KERNEL);  in aspeed_vuart_probe()
426 		return -ENOMEM;  in aspeed_vuart_probe()
428 	vuart->dev = &pdev->dev;  in aspeed_vuart_probe()
429 	timer_setup(&vuart->unthrottle_timer, aspeed_vuart_unthrottle_exp, 0);  in aspeed_vuart_probe()
433 		return -EINVAL;  in aspeed_vuart_probe()
437 	port.port.mapbase = res->start;  in aspeed_vuart_probe()
444 	port.port.dev = &pdev->dev;  in aspeed_vuart_probe()
448 	rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);  in aspeed_vuart_probe()
452 	if (of_property_read_u32(np, "clock-frequency", &clk)) {  in aspeed_vuart_probe()
453 		vuart->clk = devm_clk_get(&pdev->dev, NULL);  in aspeed_vuart_probe()
454 		if (IS_ERR(vuart->clk)) {  in aspeed_vuart_probe()
455 			dev_warn(&pdev->dev,  in aspeed_vuart_probe()
456 				"clk or clock-frequency not defined\n");  in aspeed_vuart_probe()
457 			rc = PTR_ERR(vuart->clk);  in aspeed_vuart_probe()
461 		rc = clk_prepare_enable(vuart->clk);  in aspeed_vuart_probe()
465 		clk = clk_get_rate(vuart->clk);  in aspeed_vuart_probe()
468 	/* If current-speed was set, then try not to change it. */  in aspeed_vuart_probe()
469 	if (of_property_read_u32(np, "current-speed", &prop) == 0)  in aspeed_vuart_probe()
473 	if (of_property_read_u32(np, "reg-offset", &prop) == 0)  in aspeed_vuart_probe()
477 	if (of_property_read_u32(np, "reg-shift", &prop) == 0)  in aspeed_vuart_probe()
481 	if (of_property_read_u32(np, "fifo-size", &prop) == 0)  in aspeed_vuart_probe()
497 	if (of_property_read_bool(np, "no-loopback-test"))  in aspeed_vuart_probe()
503 	if (of_property_read_bool(np, "auto-flow-control"))  in aspeed_vuart_probe()
510 	vuart->line = rc;  in aspeed_vuart_probe()
511 	vuart->port = serial8250_get_port(vuart->line);  in aspeed_vuart_probe()
514 		np, "aspeed,sirq-polarity-sense", 2, 0,  in aspeed_vuart_probe()
517 		dev_dbg(&pdev->dev,  in aspeed_vuart_probe()
518 			"aspeed,sirq-polarity-sense property not found\n");  in aspeed_vuart_probe()
527 	rc = of_property_read_u32(np, "aspeed,lpc-io-reg", &prop);  in aspeed_vuart_probe()
533 		dev_err(&pdev->dev, "invalid value in aspeed,lpc-io-reg property\n");  in aspeed_vuart_probe()
537 	rc = of_property_read_u32_array(np, "aspeed,lpc-interrupts", sirq, 2);  in aspeed_vuart_probe()
545 		dev_err(&pdev->dev, "invalid sirq number in aspeed,lpc-interrupts property\n");  in aspeed_vuart_probe()
551 		dev_err(&pdev->dev, "invalid sirq polarity in aspeed,lpc-interrupts property\n");  in aspeed_vuart_probe()
565 	clk_disable_unprepare(vuart->clk);  in aspeed_vuart_probe()
568 	sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);  in aspeed_vuart_probe()
576 	del_timer_sync(&vuart->unthrottle_timer);  in aspeed_vuart_remove()
578 	serial8250_unregister_port(vuart->line);  in aspeed_vuart_remove()
579 	sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);  in aspeed_vuart_remove()
580 	clk_disable_unprepare(vuart->clk);  in aspeed_vuart_remove()
586 	{ .compatible = "aspeed,ast2400-vuart" },
587 	{ .compatible = "aspeed,ast2500-vuart" },
593 		.name = "aspeed-vuart",