Lines Matching +full:ls1021a +full:- +full:qspi
1 # SPDX-License-Identifier: GPL-2.0-only
13 dynamic device discovery; some are even write-only or read-only.
17 chips, analog to digital (and d-to-a) converters, and more.
44 If your system has an master-capable SPI controller (which
56 by providing a high-level interface to send memory-like commands.
138 supports spi-mem interface.
208 this code to manage the per-word or per-transfer accesses to the
237 Cadence QSPI is a specialized controller for connecting an SPI
238 Flash over 1/2/4-bit wide bus. Enable this option if you have a
239 device with a Cadence QSPI controller and want to access the
258 This enables dedicated general purpose SPI/Microwire1-compatible
259 master mode interface (SSI1) for CLPS711X-based CPUs.
262 tristate "Freescale Coldfire QSPI controller"
265 This enables support for the Coldfire QSPI controller in master
269 tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller"
273 SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
291 tristate "Memory-mapped io interface driver for DW SPI core"
295 tristate "Baikal-T1 SPI driver for DW SPI core"
300 Baikal-T1 SoC is equipped with three DW APB SSI-based MMIO SPI
303 part of the Baikal-T1 System Boot Controller has got a very
305 chip-select and Tx/Rx FIFO with just 8 words depth available.
306 The later one is normally connected to an external SPI-nor flash
310 bool "Directly mapped Baikal-T1 Boot SPI flash support"
314 Baikal-T1 System Boot Controller. It is a 16MB MMIO region, which
319 time-critical tasks (like the SPI memory operations implemented
325 tristate "Diolan DLN-2 USB SPI adapter"
332 will be called spi-dln2.
345 The external bus unit (EBU) found on the FALC-ON SoC has SPI
364 tristate "Freescale QSPI controller"
372 supports the high-level SPI memory interface.
389 will be called hisi-kunpeng-spi.
407 supports the high-level SPI memory interface.
410 tristate "GPIO-based bitbanging SPI Master"
414 This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
445 will be called spi-ingenic.
466 will be called spi-intel-pci.
484 will be called spi-intel-platform.
487 tristate "J-Core SPI Master"
490 This enables support for the SPI master controller in the J-Core
503 tristate "ICP DAS LP-8841 SPI Controller for RTC"
507 DS-1302 real time clock.
510 LP-8x4x industrial computer.
513 tristate "Freescale MPC52xx SPI (non-PSC) controller support"
559 mode. VF610, LS1021A and ColdFire platforms uses the controller.
592 If built as a module, it will be called spi-microchip-core.
595 tristate "Microchip FPGA QSPI controllers"
598 This enables the QSPI driver for Microchip FPGA QSPI controllers.
599 Say Y or M here if you want to use the QSPI controllers on
601 If built as a module, it will be called spi-microchip-core-qspi.
633 This enables support for SPI-NAND mode on the MediaTek NAND
635 is implemented as a SPI-MEM controller with pipelined ECC
646 supports spi-mem interface.
693 tristate "DRA7xxx QSPI controller support"
696 QSPI master controller for DRA7xxx used for flash devices.
785 tristate "Renesas RPC-IF SPI driver"
788 SPI driver for Renesas R-Car Gen3 or RZ/G2 RPC-IF.
791 tristate "Renesas RSPI/QSPI controller"
794 SPI driver for Renesas RSPI and QSPI blocks.
797 tristate "QTI QSPI controller"
800 QSPI(Quad SPI) driver for Qualcomm QSPI controller.
808 for serial peripheral interface (SPI) mini-core. SPI in master
821 yes to this option, support will be included for the built-in SPI
825 will be called spi-geni-qcom.
835 bool "S3C24XX driver with FIQ pseudo-DMA"
840 DMA by using the fast-interrupt request framework, This allows
841 the driver to get DMA-like performance when there are either
931 supports spi-mem interface.
934 tristate "STMicroelectronics SPI SSC-based driver"
959 called as spi-sunplus-sp7021.
970 that use the de-facto standard SPI protocol.
972 It also supports the new dual-bit and quad-bit SPI protocol.
989 tristate "NVIDIA Tegra QSPI Controller"
993 QSPI driver for NVIDIA Tegra QSPI Controller interface. This
1054 tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver"
1057 Support for the SPI-I2C bridge found on the Analog Devices
1058 AD-FMCOMMS1-EBZ board.
1095 tristate "Xilinx Zynq QSPI controller"
1127 select one or more specific mux-controller drivers.
1174 If your system has a slave-capable SPI controller, you can enable