Lines Matching full:vout1
797 /* There is 1 bit gap in register after Vout1 .. Vout4 statuses */ in bd9576_uvd_handler()
839 /* There is 1 bit gap in register after Vout1 .. Vout4 statuses */ in bd9576_ovd_handler()
944 "rohm,vout1-en-low"); in bd957x_probe()
950 /* VOUT1 enable state judged by VOUT1_EN pin */ in bd957x_probe()
954 "rohm,vout1-en", GPIOD_OUT_LOW, in bd957x_probe()
955 "vout1-en"); in bd957x_probe()
967 * vout1-en LOW during OTP loading and set VOUT1 to be in bd957x_probe()
972 * I believe such case where rohm,vout1-en-low is set in bd957x_probe()
973 * and vout1-en-gpios is not is likely to be a in bd957x_probe()
977 "Failed to get VOUT1 control GPIO\n"); in bd957x_probe()
1047 * Clear the VOUT1 GPIO setting - rest of the regulators do not in bd957x_probe()