Lines Matching +full:output +full:- +full:enable
1 # SPDX-License-Identifier: GPL-2.0-only
15 output in order to save power and prolong battery life. This applies
16 to both voltage regulators (where voltage output is controllable) and
17 current sinks (where current output is controllable).
31 Say yes here to enable debugging support.
38 managed regulators and simple non-configurable regulators.
65 They provide two I2C-controlled DC/DC step-down converters with
66 sleep mode and separate enable pins.
73 It delivers digitally programmable output,
85 tristate "Active-semi act8865 voltage regulator"
90 This driver controls a active-semi act8865 voltage output
94 tristate "Active-semi ACT8945A voltage regulator"
97 This driver controls a active-semi ACT8945A voltage regulator
98 via I2C bus. The ACT8945A features three step-down DC/DC converters
99 and four low-dropout linear regulators, along with a ActivePath
110 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
114 Say y here to support Freescale i.MX on-chip ANATOP LDOs
122 If you have a AnalogicTech AAT2870 say Y to enable the
126 bool "ST-Ericsson AB8500 Power Regulators"
129 This driver supports the regulators found on the ST-Ericsson mixed
170 AS3722 PMIC. This will enable support for all the software
178 ATC260x PMICs. This will enable support for all the software
182 tristate "X-POWERS AXP20X PMIC Regulators"
193 BCM590xx PMUs. This will enable support for the software
202 This will enable support for the software controllable buck
206 will be called bd71815-regulator.
214 This will enable support for the software controllable buck
218 will be called bd71828-regulator.
226 This will enable support for the software controllable buck
230 will be called bd718x7-regulator.
237 ROHM BD9571MWV PMIC. This will enable support for the software
241 will be called bd9571mwv-regulator.
251 will be called bd9576-regulator.
268 will be called cros-ec-regulator.
282 This driver supports the voltage regulators of DA9052-BC and
283 DA9053-AA/Bx PMIC.
293 will be called da9055-regulator.
303 will be called da9062-regulator.
313 will be called da9063-regulator.
321 DA9121 is a single channel dual-phase buck converter controlled
324 DA9121 Single-channel dual-phase 10A buck converter
325 DA9130 Single-channel dual-phase 10A buck converter (Automotive)
326 DA9217 Single-channel dual-phase 6A buck converter
327 DA9122 Dual-channel single-phase 5A buck converter
328 DA9131 Dual-channel single-phase 5A buck converter (Automotive)
329 DA9220 Dual-channel single-phase 3A buck converter
330 DA9132 Dual-channel single-phase 3A buck converter (Automotive)
333 will be called da9121-regulator.
341 The DA9210 is a multi-phase synchronous step down
342 converter 12A DC-DC Buck controlled through an I2C
352 The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
353 step down converter 12A or 16A DC-DC Buck controlled through an I2C
360 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
373 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
374 regulator that delivers a digitally programmable output from an
375 input voltage supply of 2.5V to 5.5V. The output voltage is
395 and the platform has to provide a mapping of GPIO-states
404 Hi6421 is a multi-function device which, on regulator part, provides
414 Hi6421v530 is a multi-function device which, on regulator part,
454 One boost output voltage is configurable and always on.
490 provides two step-down converters and two general-purpose LDO
500 chip contains six step-down DC/DC converters which can support
508 provides four step-down converters. It supports software based
518 tristate "LTC3589 8-output voltage regulator"
522 This enables support for the LTC3589, LTC3589-1, and LTC3589-2
523 8-output regulators controlled via I2C.
526 tristate "LTC3676 8-output voltage regulator"
531 8-output regulators controlled via I2C.
545 This driver controls a Maxim 1586 or 1587 voltage output
556 The MAX5970/5978 is a smart switch with no output regulation, but
563 This driver controls Maxim MAX77620 voltage output regulator
565 chip to control Step-Down DC-DC and LDOs. Say Y here to
566 enable the regulator driver.
581 This driver controls a Maxim 8649 voltage output regulator via
588 This driver controls a Maxim 8660/8661 voltage output
596 This driver controls a Maxim 8893 voltage output
603 This driver controls a Maxim 8907 voltage output regulator
605 chip to control Step-Down DC-DC and LDOs.
617 This driver controls a Maxim 8952 voltage output regulator
618 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
627 The MAXIM MAX8973A high-efficiency. three phase, DC-DC step-down
628 switching regulator delivers up to 9A of output current. Each
638 S5PV210, and Exynos-4 chips to control VCC_CORE and
645 This driver controls a Maxim 8998 voltage output regulator
650 tristate "Maxim MAX20086-MAX20089 Camera Power Protectors"
654 This driver controls a Maxim MAX20086-MAX20089 camera power
664 Exynos-4 chips to control VARM and VINT voltages.
673 Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
691 It includes support for control of output voltage. This
721 suspend-to-ram/standby transition.
728 Say y here to support the MP5416 PMIC. This will enable supports
756 Say y here to support the MPQ7920 PMIC. This will enable supports
766 Say y here to select this option to enable the power regulator of
776 Say y here to select this option to enable the power regulator of
785 Say y here to select this option to enable the power regulator of
794 Say y here to select this option to enable the power regulator of
803 Say y here to select this option to enable the power regulator of
812 Say y here to select this option to enable the power regulator of
821 Say y here to select this option to enable the power regulator of
830 Say Y here to enable MT6360 regulator support.
832 2-channel buck with Thermal Shutdown and Overload Protection
833 6-channel High PSRR and Low Dropout LDO.
839 Say Y here to enable MT6370 regulator support.
847 Say y here to select this option to enable the power regulator of
856 Say y here to select this option to enable the power regulator of
876 chips say Y here. This will enable support for all the software
924 "pf8x00-regulator".
974 "qcom_rpm-regulator".
996 "qcom_smd-regulator".
1007 "qcom_spmi-regulator".
1014 regulator used to enable the VBUS output.
1016 Say M here if you want to include support for enabling the VBUS output
1020 tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator"
1026 This driver supports ATTINY regulator on the Raspberry Pi 7-inch
1027 touchscreen unit. The regulator is used to enable power to the
1034 Select this option to enable the power regulator of RICOH
1044 Select this option to enable the power regulator of ROCKCHIP
1112 The RT5759 is a high-performance, synchronous step-down DC-DC
1113 converter that can deliver up to 9A output current from 3V to 6.5V
1122 This device automatically change voltage output mode from
1124 The wide output range is from 2025mV to 5200mV and can be used on most
1133 It can support up to 14A output current and adjustable output voltage
1142 The RTQ2134 is a multi-phase, programmable power management IC that
1143 integrate with four high efficient, synchronous step-down converter
1144 cores. It features wide output voltage range and the capability to
1163 buck-boost. This device is suitable for automotive TFT-LCD panel.
1169 This driver controls Samsung S2MPA01 voltage output regulator
1177 output regulator via I2C bus. The chip is comprised of high efficient
1178 Buck converters including Dual-Phase Buck converter, Buck-Boost
1185 This driver supports a Samsung S5M8767A voltage output regulator
1186 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
1187 supports DVS mode with 8bits of output voltage control.
1200 This driver supports Skyworks SKY81452 voltage output regulator
1205 will be called sky81452-regulator.
1221 multi-function device.
1232 will be called stm32-booster.
1244 will be called stm32-vrefbuf.
1266 tristate "TI Adaptive Body Bias on-chip LDO"
1269 Select this option to support Texas Instruments' on-chip Adaptive Body
1294 This driver supports SY8106A single output regulator.
1301 This driver supports SY8824C single output regulator.
1308 This driver supports SY8827N single output regulator.
1316 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
1318 The voltage output can be configure through I2C interface or PWM
1337 high-frequency synchronous step down dc-dc converter optimized
1338 for battery-powered portable applications.
1346 high-frequency synchronous step-down converters with an I2C
1355 three step-down converters and two general-purpose LDO voltage regulators.
1356 It supports TI's software based Class-2 SmartReflex implementation.
1363 three step-down converters and two general-purpose LDO voltage regulators.
1364 It supports TI's software based Class-2 SmartReflex implementation.
1381 tristate "TI TPS65132 Dual Output Power regulators"
1385 This driver supports TPS65132 single inductor - dual output
1393 provides three step-down converters and four general-purpose LDO
1402 provides six step-down converters and one general-purpose LDO
1420 provides three step-down converters and two general-purpose LDO
1450 The module will be called "tps68470-regulator".
1472 This driver provides support for voltage regulators whose output