Lines Matching +full:db8500 +full:- +full:i2c
1 # SPDX-License-Identifier: GPL-2.0-only
38 managed regulators and simple non-configurable regulators.
61 depends on I2C
65 They provide two I2C-controlled DC/DC step-down converters with
74 the voltage is programmed via I2C interface.
85 tristate "Active-semi act8865 voltage regulator"
86 depends on I2C
90 This driver controls a active-semi act8865 voltage output
91 regulator via I2C bus.
94 tristate "Active-semi ACT8945A voltage regulator"
97 This driver controls a active-semi ACT8945A voltage regulator
98 via I2C bus. The ACT8945A features three step-down DC/DC converters
99 and four low-dropout linear regulators, along with a ActivePath
104 depends on I2C
110 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
114 Say y here to support Freescale i.MX on-chip ANATOP LDOs
126 bool "ST-Ericsson AB8500 Power Regulators"
129 This driver supports the regulators found on the ST-Ericsson mixed
182 tristate "X-POWERS AXP20X PMIC Regulators"
206 will be called bd71815-regulator.
218 will be called bd71828-regulator.
230 will be called bd718x7-regulator.
241 will be called bd9571mwv-regulator.
251 will be called bd9576-regulator.
268 will be called cros-ec-regulator.
282 This driver supports the voltage regulators of DA9052-BC and
283 DA9053-AA/Bx PMIC.
293 will be called da9055-regulator.
303 will be called da9062-regulator.
313 will be called da9063-regulator.
317 depends on I2C && OF
321 DA9121 is a single channel dual-phase buck converter controlled
322 through an I2C interface.
324 DA9121 Single-channel dual-phase 10A buck converter
325 DA9130 Single-channel dual-phase 10A buck converter (Automotive)
326 DA9217 Single-channel dual-phase 6A buck converter
327 DA9122 Dual-channel single-phase 5A buck converter
328 DA9131 Dual-channel single-phase 5A buck converter (Automotive)
329 DA9220 Dual-channel single-phase 3A buck converter
330 DA9132 Dual-channel single-phase 3A buck converter (Automotive)
333 will be called da9121-regulator.
337 depends on I2C
341 The DA9210 is a multi-phase synchronous step down
342 converter 12A DC-DC Buck controlled through an I2C
347 depends on I2C
352 The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
353 step down converter 12A or 16A DC-DC Buck controlled through an I2C
360 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
365 DB8500 PRCMU
369 depends on I2C
373 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
376 programmed through an I2C interface.
380 depends on I2C && (OF || COMPILE_TEST)
385 (PMIC), it is controlled by I2C and provides one BUCK, one BOOST
395 and the platform has to provide a mapping of GPIO-states
404 Hi6421 is a multi-function device which, on regulator part, provides
414 Hi6421v530 is a multi-function device which, on regulator part,
437 depends on I2C
444 depends on I2C
466 depends on I2C
473 depends on I2C
480 depends on I2C
490 provides two step-down converters and two general-purpose LDO
496 depends on I2C
500 chip contains six step-down DC/DC converters which can support
508 provides four step-down converters. It supports software based
518 tristate "LTC3589 8-output voltage regulator"
519 depends on I2C
522 This enables support for the LTC3589, LTC3589-1, and LTC3589-2
523 8-output regulators controlled via I2C.
526 tristate "LTC3676 8-output voltage regulator"
527 depends on I2C
531 8-output regulators controlled via I2C.
537 This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
543 depends on I2C
546 regulator via I2C bus. The provided regulator is suitable
551 depends on I2C
555 This driver controls a Maxim 5970/5978 switch via I2C bus.
564 via I2C bus. The provided regulator is suitable for Tegra
565 chip to control Step-Down DC-DC and LDOs. Say Y here to
578 depends on I2C
582 I2C bus.
586 depends on I2C
589 regulator via I2C bus.
593 depends on I2C
597 regulator via I2C bus.
604 via I2C bus. The provided regulator is suitable for Tegra
605 chip to control Step-Down DC-DC and LDOs.
615 depends on I2C
618 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
623 depends on I2C
627 The MAXIM MAX8973A high-efficiency. three phase, DC-DC step-down
637 via I2C bus. The provided regulator is suitable for S5PC110,
638 S5PV210, and Exynos-4 chips to control VCC_CORE and
646 via I2C bus. The provided regulator is suitable for S3C6410
650 tristate "Maxim MAX20086-MAX20089 Camera Power Protectors"
651 depends on I2C
654 This driver controls a Maxim MAX20086-MAX20089 camera power
655 protectorvia I2C bus. The regulator has 2 or 4 outputs depending on
663 via I2C bus. The provided regulator is suitable for
664 Exynos-4 chips to control VARM and VINT voltages.
670 This driver controls a Maxim 77693/77843 regulators via I2C bus.
673 Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
680 via I2C bus. The provided regulator is suitable for
686 depends on I2C
689 This driver controls a Maxim 77826 regulator via I2C bus.
715 depends on I2C && OF
721 suspend-to-ram/standby transition.
725 depends on I2C && OF
735 depends on I2C
746 depends on I2C && (OF || COMPILE_TEST)
753 depends on I2C && OF
763 depends on I2C
832 2-channel buck with Thermal Shutdown and Overload Protection
833 6-channel High PSRR and Low Dropout LDO.
894 depends on I2C
916 depends on I2C && OF
924 "pf8x00-regulator".
928 depends on I2C && OF
936 depends on I2C
944 depends on I2C
951 depends on I2C
974 "qcom_rpm-regulator".
996 "qcom_smd-regulator".
1007 "qcom_spmi-regulator".
1020 tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator"
1022 depends on I2C
1026 This driver supports ATTINY regulator on the Raspberry Pi 7-inch
1038 outputs which can be controlled by i2c communication.
1048 outputs which can be controlled by i2c communication.
1062 depends on I2C
1098 depends on I2C
1104 I2C control interface.
1108 depends on I2C
1112 The RT5759 is a high-performance, synchronous step-down DC-DC
1118 depends on I2C
1129 depends on I2C
1138 depends on I2C
1142 The RTQ2134 is a multi-phase, programmable power management IC that
1143 integrate with four high efficient, synchronous step-down converter
1149 depends on I2C
1158 depends on I2C
1163 buck-boost. This device is suitable for automotive TFT-LCD panel.
1170 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
1177 output regulator via I2C bus. The chip is comprised of high efficient
1178 Buck converters including Dual-Phase Buck converter, Buck-Boost
1186 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
1201 via I2C bus. SKY81452 has one voltage linear regulator can be
1205 will be called sky81452-regulator.
1209 depends on I2C
1221 multi-function device.
1232 will be called stm32-booster.
1244 will be called stm32-vrefbuf.
1266 tristate "TI Adaptive Body Bias on-chip LDO"
1269 Select this option to support Texas Instruments' on-chip Adaptive Body
1291 depends on I2C && (OF || COMPILE_TEST)
1298 depends on I2C && (OF || COMPILE_TEST)
1305 depends on I2C && (OF || COMPILE_TEST)
1312 depends on I2C
1316 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
1318 The voltage output can be configure through I2C interface or PWM
1332 depends on I2C
1337 high-frequency synchronous step down dc-dc converter optimized
1338 for battery-powered portable applications.
1342 depends on I2C && OF
1346 high-frequency synchronous step-down converters with an I2C
1351 depends on I2C
1355 three step-down converters and two general-purpose LDO voltage regulators.
1356 It supports TI's software based Class-2 SmartReflex implementation.
1360 depends on I2C
1363 three step-down converters and two general-purpose LDO voltage regulators.
1364 It supports TI's software based Class-2 SmartReflex implementation.
1382 depends on I2C && GPIOLIB
1385 This driver supports TPS65132 single inductor - dual output
1393 provides three step-down converters and four general-purpose LDO
1402 provides six step-down converters and one general-purpose LDO
1420 provides three step-down converters and two general-purpose LDO
1450 The module will be called "tps68470-regulator".