Lines Matching full:charging

421 	 * other type of charging.  in ab8500_power_supply_changed()
454 * USB charging and no psy has been created, but we still in ab8500_charger_set_usb_connected()
707 * This means that charging current from USB source in ab8500_charger_max_usb_curr()
775 dev_err(di->dev, "USB Type - Charging not allowed\n"); in ab8500_charger_max_usb_curr()
787 dev_dbg(di->dev, "USB Type - Charging not allowed\n"); in ab8500_charger_max_usb_curr()
805 dev_err(di->dev, "USB Type invalid - try charging anyway\n"); in ab8500_charger_max_usb_curr()
1091 * to the register. Returns -1 if charging is not allowed
1148 * charging is started. Instead we need to implement
1345 * Power ON/OFF charging LED indication
1353 /* Power ON charging LED indicator, set LED current to 5mA */ in ab8500_charger_led_en()
1370 /* Power off charging LED indicator */ in ab8500_charger_led_en()
1384 * ab8500_charger_ac_en() - enable or disable ac charging
1387 * @vset_uv: charging voltage in microvolt
1388 * @iset_ua: charging current in microampere
1390 * Enable/Disable AC/Mains charging and turns on/off the charging led
1411 /* Enable AC charging */ in ab8500_charger_ac_en()
1417 * This will turn off charging for a short while. in ab8500_charger_ac_en()
1441 "charging not started\n"); in ab8500_charger_ac_en()
1445 /* ChVoltLevel: maximum battery charging voltage */ in ab8500_charger_ac_en()
1481 /* Power on charging LED indication */ in ab8500_charger_ac_en()
1488 /* Disable AC charging */ in ab8500_charger_ac_en()
1507 * We can't turn off charging completely in ab8500_charger_ac_en()
1509 * If we do, charging will not start again. in ab8500_charger_ac_en()
1553 dev_dbg(di->dev, "%s Disabled AC charging\n", __func__); in ab8500_charger_ac_en()
1561 * ab8500_charger_usb_en() - enable usb charging
1564 * @vset_uv: charging voltage in microvolt
1567 * Enable/Disable USB charging and turns on/off the charging led respectively.
1590 * This will turn off charging for a short while. in ab8500_charger_usb_en()
1606 /* Enable USB charging */ in ab8500_charger_usb_en()
1615 "charging not started\n"); in ab8500_charger_usb_en()
1643 /* If success power on charging LED indication */ in ab8500_charger_usb_en()
1670 /* Disable USB charging */ in ab8500_charger_usb_en()
1671 dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); in ab8500_charger_usb_en()
1708 dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); in ab8500_charger_usb_en()
1720 * ab8500_charger_usb_check_enable() - enable usb charging
1722 * @vset_uv: charging voltage in microvolt
1748 dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n"); in ab8500_charger_usb_check_enable()
1769 * ab8500_charger_ac_check_enable() - enable usb charging
1771 * @vset_uv: charging voltage in microvolt
1797 dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n"); in ab8500_charger_ac_check_enable()
1942 * charger when charging with at some specific levels. This issue is only valid
2286 * to start the charging process. but by jumping in ab8500_charger_usb_link_status_work()
2429 * of 1sec for enabling charging in ab8500_charger_usb_state_changed_work()
2435 * USB is configured, enable charging with the charging in ab8500_charger_usb_state_changed_work()
2828 * needs to be restarted for charging to start again in ab8500_charger_chwdexp_handler()
2896 * online: ac/mains charging is in progress or not
2963 * online: usb charging is in progress or not
3037 * charging of the backup battery
3147 dev_err(di->dev, "failed to setup backup battery charging\n"); in ab8500_charger_init_hw_registers()
3151 /* Enable backup battery charging */ in ab8500_charger_init_hw_registers()
3366 /* Disable AC charging */ in ab8500_charger_unbind()
3369 /* Disable USB charging */ in ab8500_charger_unbind()
3450 * interrupts during charging in ab8500_charger_probe()
3508 * The AB8505 only supports USB charging. If we are not the in ab8500_charger_probe()