Lines Matching full:regulatory

270  * 1)  Regulatory information (max txpower and channel usage flags) is provided
307  * 1)  Compare desired txpower vs. (EEPROM) regulatory limit for this channel.
308  *     Do not exceed regulatory limit; reduce target txpower if necessary.
312  *     regulatory limit by 3 dB (half-power) for each transmitter, so the
313  *     combined total output of the 2 transmitters is within regulatory limits.
332  *     no reduction (such as with regulatory txpower limits) is required.
363  *     the middle set of measurements is closest to the regulatory limits,
454  *     avoids any need to double-check for regulatory compliance after
482  * limit each transmitter to deliver a max of 3 dB below the regulatory limit
484  * txpower is within regulatory limits.
495  * is within regulatory and saturation limits, driver must additionally
519  * requires consideration of average power (to satisfy regulatory constraints),
763  * Sanity checks and default values for EEPROM regulatory levels.
766  * Regulatory limits refer to the maximum average txpower allowed by
767  * regulatory agencies in the geographies in which the device is meant
769  * and channel-specific; each channel has an individual regulatory limit
790  * nor the regulatory limit, when calculating Tx power settings for various