Lines Matching +full:75 +full:mhz
132 * This function takes the channel value in MHz and sets
139 * (freq_ref = 40MHz)
143 * (freq_ref = 40MHz/(24>>amodeRefSel))
145 * For 5GHz channels which are 5MHz spaced,
147 * (freq_ref = 40MHz)
164 div = 75; in ar9003_hw_set_channel()
173 channelSel = (freq * 2) / 75; in ar9003_hw_set_channel()
174 chan_frac = (((freq * 2) % 75) * 0x20000) / 75; in ar9003_hw_set_channel()
188 channelSel = freq / 75; in ar9003_hw_set_channel()
189 chan_frac = ((freq % 75) * 0x20000) / 75; in ar9003_hw_set_channel()
248 * Need to verify range +/- 10 MHz in control channel, otherwise spur in ar9003_hw_spur_mitigate_mrc_cck()
619 /* Enable 11n HT, 20 MHz */ in ar9003_hw_set_channel_regs()
628 /* Configure control (primary) channel at +-10MHz */ in ar9003_hw_set_channel_regs()
1403 ath_dbg(common, ANI, "ver %d.%d opmode %u chan %d Mhz\n", in ar9003_hw_ani_cache_ini_regs()
2072 * The time unit for watchdog event is 2^15 44/88MHz cycles. in ar9003_hw_bb_watchdog_config()
2074 * For HT20 we have a time unit of 2^15/44 MHz = .74 ms per tick in ar9003_hw_bb_watchdog_config()
2075 * For HT40 we have a time unit of 2^15/88 MHz = .37 ms per tick in ar9003_hw_bb_watchdog_config()