Lines Matching full:command

13 /* SR9800 spec. command table on Linux Platform */
15 /* command : Software Station Management Control Reg */
17 /* command : PHY Read Reg */
19 /* command : PHY Write Reg */
21 /* command : Hardware Station Management Control Reg */
23 /* command : SROM Read Reg */
25 /* command : SROM Write Reg */
27 /* command : SROM Write Enable Reg */
29 /* command : SROM Write Disable Reg */
31 /* command : RX Control Read Reg */
44 /* command : RX Control Write Reg */
46 /* command : IPG0/IPG1/IPG2 Control Read Reg */
48 /* command : IPG0/IPG1/IPG2 Control Write Reg */
50 /* command : Node ID Read Reg */
52 /* command : Node ID Write Reg */
54 /* command : Multicast Filter Array Read Reg */
56 /* command : Multicast Filter Array Write Reg */
58 /* command : Eth/HomePNA PHY Address Reg */
60 /* command : Medium Status Read Reg */
65 /* command : Medium Status Write Reg */
80 /* command : Monitor Mode Status Read Reg */
82 /* command : Monitor Mode Status Write Reg */
84 /* command : GPIO Status Read Reg */
94 /* command : GPIO Status Write Reg */
96 /* command : Eth PHY Power and Reset Control Reg */
106 /* command : Software Interface Selection Status Read Reg */
108 /* command : Software Interface Selection Status Write Reg */
110 /* command : BULK in Buffer Size Reg */
112 /* command : LED_MUX Control Reg */