Lines Matching +full:10 +full:a
19 Say Y if you want to use one of the following 10Mbps USB Ethernet
27 This driver makes the adapter appear as a normal Ethernet interface,
29 eth1, if you have a PCI or ISA ethernet card installed.
31 To compile this driver as a module, choose M here: the
37 Say Y here if you want to use one of the following 10Mbps only
40 ADS USB-10BT
59 This driver is likely to work with most 10Mbps only USB Ethernet
66 This driver makes the adapter appear as a normal Ethernet interface,
68 eth1, if you have a PCI or ISA ethernet card installed.
70 To compile this driver as a module, choose M here: the
85 To compile this driver as a module, choose M here: the
96 To compile this driver as a module, choose M here: the
108 10/100 Ethernet adapters and RTL8153 based USB 3.0 10/100/1000
111 To compile this driver as a module, choose M here: the
123 & USB 3 10/100/1000 Ethernet adapters.
124 LAN7800 : USB 3 to 10/100/1000 Ethernet adapter
125 LAN7850 : USB 2 to 10/100/1000 Ethernet adapter
126 LAN7801 : USB 3 to 10/100/1000 Ethernet adapter (MAC only)
130 To compile this driver as a module, choose M here: the
138 with "minidrivers" built around a common network driver core
149 - An intelligent USB gadget, perhaps embedding a Linux system.
154 - Network adapter hardware (like those for 10/100 Ethernet) which
157 The link will appear with a name like "usb0", when the link is
158 a two-node link, or "eth0" for most CDC-Ethernet devices. Those
164 To compile this driver as a module, choose M here: the
177 10/100 Ethernet adapters.
200 tristate "ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet"
223 Class (CDC) Ethernet Control Model, a specification that's easy to
242 IEEE 802 "local assignment" bit is set in the address, a "usbX"
250 Class (CDC) Ethernet Emulation Model, a specification that's easy to
256 IEEE 802 "local assignment" bit is set in the address, a "usbX"
269 Say "y" to link the driver statically, or "m" to build a
285 This driver supports huawei-style NCM devices, that use NCM as a
291 To compile this driver as a module, choose M here: the module will be
309 To compile this driver as a module, choose M here: the
313 tristate "Davicom DM96xx based USB 10/100 ethernet devices"
318 based USB 10/100 Ethernet adapters.
321 tristate "CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices"
326 10/100 Ethernet adapters.
329 tristate "CoreChip-sz SR9800 based USB 2.0 10/100 ethernet devices"
336 This driver makes the adapter appear as a normal Ethernet interface,
338 eth1, if you have a PCI or ISA ethernet card installed.
340 To compile this driver as a module, choose M here: the
354 tristate "SMSC LAN95XX based USB 2.0 10/100 ethernet devices"
364 10/100 Ethernet adapters.
367 tristate "GeneSys GL620USB-A based cables"
370 Choose this option if you're using a host-to-host cable,
380 Choose this option if you're using a host-to-host cable based
390 Choose this option if you're using a host-to-host cable
397 Choose this option if you're using a 10/100 Ethernet USB2
408 various devices that may only support this protocol. A variant
440 Choose this option if you're using a host-to-host cable
448 Choose this option if you're using a host-to-host cable
449 based on this design. Note that AnchorChips is now a
458 Choose this option if you're using a host-to-host cable
476 Although the ROMs shipped with Sharp Zaurus products use a
478 this simpler protocol by installing a different kernel.
493 Choose this option if you're using a host-to-host cable
504 Zaurus models like the SL-5000D, SL-5500, SL-5600, A-300, B-500.
518 Choose this option if you're using a Conexant CX82310-based ADSL
526 Choose this option if you have a Samsung Kalmia based USB modem
529 To compile this driver as a module, choose M here: the
549 A modem manager with support for QMI is recommended.
551 To compile this driver as a module, choose M here: the
562 To compile this driver as a module, choose M here: the
569 Choose this option if you're using a 14Mb USB-based PLC
577 Choose this option to support the Phonet interface to a Nokia
597 Choose this option if you have a Sierra Wireless USB-to-WWAN device.
599 To compile this driver as a module, choose M here: the
609 interface exposed by the modem firmware. To establish a connection
610 you will first need a userspace program that sends the right
612 likely also a DHCP client. See this thread about using the
622 Choose this option if you have a USB ethernet adapter with a QinHeng
625 To compile this driver as a module, choose M here: the