615  * register for fiber link.
641  *   enabled, then we write the BMCR. Adapted for fiber link in
659 	/* Setup fiber advertisement */  in marvell_config_aneg_fiber()
697 	/* Then the fiber link */  in m88e1111_config_aneg()
703 		/* Do not touch the fiber advertisement if we're in copper->sgmii mode.  in m88e1111_config_aneg()
733 	/* Do not touch the fiber page if we're in copper->sgmii mode */  in m88e1510_config_aneg()
737 	/* Then the fiber link */  in m88e1510_config_aneg()
1558  * @lpa: value of the MII_LPA register for fiber link
1574 				       int fiber, int status)  in marvell_read_status_page_an()  argument
1603 	if (!fiber) {  in marvell_read_status_page_an()
1614 		/* The fiber link is only 1000M capable */  in marvell_read_status_page_an()
1645 	int fiber;  in marvell_read_status_page()  local
1653 	 * and the PHY status register for fiber link status.  in marvell_read_status_page()
1664 		fiber = 1;  in marvell_read_status_page()
1666 		fiber = 0;  in marvell_read_status_page()
1673 	phydev->port = fiber ? PORT_FIBRE : PORT_TP;  in marvell_read_status_page()
1676 		err = marvell_read_status_page_an(phydev, fiber, status);  in marvell_read_status_page()
1685  * Some Marvell's phys have two modes: fiber and copper.
1688  *   First, check the fiber link and status.
1689  *   If the fiber link is down, check the copper link and status which
1696 	/* Check the fiber mode first */  in marvell_read_status()
1708 		/* If the fiber link is up, it is the selected and  in marvell_read_status()
1710 		 * fiber page. Please to be careful about that, avoid  in marvell_read_status()
1712 		 * could break the behaviour for some fiber phy like  in marvell_read_status()
1718 		/* If fiber link is down, check and save copper mode state */  in marvell_read_status()
1733  * Some Marvell's phys have two modes: fiber and copper.
1740 	/* Suspend the fiber mode first */  in marvell_suspend()
1768  * Some Marvell's phys have two modes: fiber and copper.
1775 	/* Resume the fiber mode first */  in marvell_resume()