Lines Matching full:sdio
6 comment "MMC/SD/SDIO Host Controller Drivers"
246 tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller"
250 This selects the Cadence SD/SDIO/eMMC driver.
402 Needed by some Fujitsu SoC for MMC / SD / SDIO support.
413 Needed by Milbeaut SoC for MMC / SD / SDIO support.
440 MMC 5.1 compliant and supports SD, eMMC and SDIO interfaces.
452 The controller supports the SD/SDIO Spec 3.x and eMMC Spec 4.5x
559 SD/MMC/SDIO devices.
601 tristate "Marvell MMC/SD/SDIO host driver"
605 This selects the Marvell SDIO host driver.
606 SDIO may currently be found on the Kirkwood 88F6281 and 88F6192
621 tristate "MMC/SD/SDIO over SPI"
626 Some systems access MMC/SD/SDIO cards using a SPI controller
627 instead of using a "native" MMC/SD/SDIO controller. This has a
629 advantage of working on many systems without dedicated MMC/SD/SDIO
647 bool "Hardware support for SDIO IRQ"
650 Enable the hardware support for SDIO interrupts instead of using
688 tristate "Spreadtrum SDIO host Controller"
694 This selects the SDIO Host Controller in Spreadtrum
713 tristate "Renesas SDHI SD/SDIO controller support"
718 This provides support for the SDHI SD/SDIO controller found in
722 tristate "DMA for SDHI SD/SDIO controllers using SYS-DMAC"
726 This provides DMA support for SDHI SD/SDIO controllers
731 tristate "DMA for SDHI SD/SDIO controllers using on-chip bus mastering"
736 This provides DMA support for SDHI SD/SDIO controllers
893 tristate "VUB300 USB to SDIO/SD/MMC Host Controller support"
898 The VUB300 is a USB-SDIO Host Controller Interface chip
899 that enables the host computer to use SDIO/SD/MMC cards
903 USB to SDIO/SD/MMC adapters and embedded on some motherboards.
906 to single and multifunction SDIO cards.
908 Some SDIO cards will need a firmware file to be loaded and
931 CSR boards with this device include: USB<>SDIO (M1985v2),
934 Note: These controllers only support SDIO cards and do not
949 tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support"
952 This selects support for the Renesas USDHI6ROL0 SD/SDIO
1027 This is needed if support for any SD/SDIO/MMC devices is required.
1042 tristate "Broadcom SDIO/SD/MMC support"
1048 This selects support for the SDIO/SD/MMC Host Controller on
1054 tristate "Marvell Xenon eMMC/SD/SDIO SDHCI driver"
1057 This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
1070 SD/MMC/SDIO devices.
1085 SD/MMC/SDIO devices.