151 	 * calculated  above and total rail current divided by number phases.  in mp2975_read_phase()
334 	 * Identify multiphase for rail 2 - could be from 0 to 4.  in mp2975_identify_multiphase_rail2()
341 	/* Identify multiphase for rail 2 - could be from 0 to 4. */  in mp2975_identify_multiphase_rail2()
363 	/* Set phases for rail 2 from upper to lower. */  in mp2975_set_phase_rail2()
378 	/* Identify multiphase for rail 1 - could be from 1 to 8. */  in mp2975_identify_multiphase()
387 	 * to different phase count applications for rail 1 and rail 2.  in mp2975_identify_multiphase()
388 	 * Rail 1 can be set to 8 phases, while rail 2 can only be set to 4  in mp2975_identify_multiphase()
389 	 * phases at most. When rail 1’s phase count is configured as 0, rail  in mp2975_identify_multiphase()
390 	 * 1 operates with 1-phase DCM. When rail 2 phase count is configured  in mp2975_identify_multiphase()
391 	 * as 0, rail 2 is disabled.  in mp2975_identify_multiphase()
441 	/* Identify VID mode for rail 1. */  in mp2975_identify_rails_vid()
448 	/* Identify VID mode for rail 2, if connected. */  in mp2975_identify_rails_vid()
507 	/* Get voltage reference value for rail 1. */  in mp2975_vref_get()
514 	/* Get voltage reference value for rail 2, if connected. */  in mp2975_vref_get()
697 	/* Identify multiphase configuration for rail 2. */  in mp2975_probe()
714 	/* Identify VID setting per rail. */  in mp2975_probe()