206 /* Unlike most Intel display engines, on Cedarview the DPLL registers
208  * DPLL reference clock is on in the DPLL control register, but before
209  * the DPLL is enabled in the DPLL control register.
260 		DRM_DEBUG_KMS("use their DPLL for pipe A/B\n");  in cdv_dpll_set_clock_cdv()
583 	u32 dpll = 0, dspcntr, pipeconf;  in cdv_intel_crtc_mode_set()  local
664 	dpll = DPLL_VGA_MODE_DIS;  in cdv_intel_crtc_mode_set()
675 	dpll |= DPLL_SYNCLOCK_ENABLE;  in cdv_intel_crtc_mode_set()
677 		dpll |= DPLLB_MODE_LVDS;  in cdv_intel_crtc_mode_set()
679 		dpll |= DPLLB_MODE_DAC_SERIAL; */  in cdv_intel_crtc_mode_set()
680 	/* dpll |= (2 << 11); */  in cdv_intel_crtc_mode_set()
721 	REG_WRITE(map->dpll, dpll | DPLL_VGA_MODE_DIS | DPLL_SYNCLOCK_ENABLE);  in cdv_intel_crtc_mode_set()
722 	REG_READ(map->dpll);  in cdv_intel_crtc_mode_set()
757 	dpll |= DPLL_VCO_ENABLE;  in cdv_intel_crtc_mode_set()
766 	REG_WRITE(map->dpll,  in cdv_intel_crtc_mode_set()
767 		(REG_READ(map->dpll) & ~DPLL_LOCK) | DPLL_VCO_ENABLE);  in cdv_intel_crtc_mode_set()
768 	REG_READ(map->dpll);  in cdv_intel_crtc_mode_set()
772 	if (!(REG_READ(map->dpll) & DPLL_LOCK)) {  in cdv_intel_crtc_mode_set()
773 		dev_err(dev->dev, "Failed to get DPLL lock\n");  in cdv_intel_crtc_mode_set()
841 	u32 dpll;  in cdv_intel_crtc_clock_get()  local
848 		dpll = REG_READ(map->dpll);  in cdv_intel_crtc_clock_get()
849 		if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)  in cdv_intel_crtc_clock_get()
856 		dpll = p->dpll;  in cdv_intel_crtc_clock_get()
857 		if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)  in cdv_intel_crtc_clock_get()
872 		    ffs((dpll &  in cdv_intel_crtc_clock_get()
877 			dev_err(dev->dev, "PLL %d\n", dpll);  in cdv_intel_crtc_clock_get()
881 		if ((dpll & PLL_REF_INPUT_MASK) ==  in cdv_intel_crtc_clock_get()
888 		if (dpll & PLL_P1_DIVIDE_BY_TWO)  in cdv_intel_crtc_clock_get()
892 			    ((dpll &  in cdv_intel_crtc_clock_get()
896 		if (dpll & PLL_P2_DIVIDE_BY_4)  in cdv_intel_crtc_clock_get()