Lines Matching full:bridges

45  * either connected to it directly, or through a chain of bridges::
51  * Chaining multiple bridges to the output of a bridge, or the same bridge to
52  * the output of different bridges, is not supported.
68  * Bridges are responsible for linking themselves with the next bridge in the
72  * Once these links are created, the bridges can participate along with encoder
80  * bridges in the chain.
92  * Bridges also participate in implementing the &drm_connector at the end of
102  * The interaction between the bridges and other frameworks involved in
253  * Note that bridges attached to encoders are auto-detached during encoder
352  * - The encoder-related operations support control of the bridges in the
373  *   negotiate the formats transmitted between bridges in the chain when
382  *   based on a chain of bridges. DRM bridges traditionally create a
383  *   &drm_connector for bridges meant to be used at the end of the chain. This
384  *   puts additional burden on bridge drivers, especially for bridges that may
390  *   flexible, a new model allows bridges to unconditionally skip creation of
397  *   each chain of bridges, and implement those connector instances based on
424  *   connector creation. For intermediate bridges in the chain, the flag shall
434  * drm_bridge_chain_mode_fixup - fixup proposed mode for all bridges in the
440  * Calls &drm_bridge_funcs.mode_fixup for all the bridges in the
471  * drm_bridge_chain_mode_valid - validate the mode against all bridges in the
477  * Calls &drm_bridge_funcs.mode_valid for all the bridges in the encoder
513  * drm_bridge_chain_disable - disables all bridges in the encoder chain
516  * Calls &drm_bridge_funcs.disable op for all the bridges in the encoder
542  * drm_bridge_chain_post_disable - cleans up after disabling all bridges in the
546  * Calls &drm_bridge_funcs.post_disable op for all the bridges in the
568  * drm_bridge_chain_mode_set - set proposed mode for all bridges in the
574  * Calls &drm_bridge_funcs.mode_set op for all the bridges in the
597  * drm_bridge_chain_pre_enable - prepares for enabling all bridges in the
601  * Calls &drm_bridge_funcs.pre_enable op for all the bridges in the encoder
627  * drm_bridge_chain_enable - enables all bridges in the encoder chain
630  * Calls &drm_bridge_funcs.enable op for all the bridges in the encoder
652  * drm_atomic_bridge_chain_disable - disables all bridges in the encoder chain
657  * &drm_bridge_funcs.disable) op for all the bridges in the encoder chain,
695  * drm_atomic_bridge_chain_post_disable - cleans up after disabling all bridges
701  * &drm_bridge_funcs.post_disable) op for all the bridges in the encoder chain,
736  * drm_atomic_bridge_chain_pre_enable - prepares for enabling all bridges in
742  * &drm_bridge_funcs.pre_enable) op for all the bridges in the encoder chain,
780  * drm_atomic_bridge_chain_enable - enables all bridges in the encoder chain
785  * &drm_bridge_funcs.enable) op for all the bridges in the encoder chain,
1070 	 * not necessarily what all bridges want, but that's what most of them  in drm_atomic_bridge_propagate_bus_flags()
1085  * &drm_bridge_funcs.mode_fixup()) op for all the bridges in the encoder chain,
1117 		 * that preceding bridges in the chain can propagate the new  in drm_atomic_bridge_chain_check()