Lines Matching full:programmed

191  * @resets: Programmed state of the reset lines.
192  * @programmed_state:	The state as programmed by set_device.
305  * @programmed_state: Any programmed state of the clock. This is one of
427  *		allowable programmed frequency and does not account for clock
432  *		allowable programmed frequency and does not account for clock
474  *		allowable programmed frequency and does not account for clock
476  * @target_freq_hz: The target clock frequency. The clock will be programmed
479  *		allowable programmed frequency and does not account for clock
666  * @addr_lo: 32 LSBs of ring base address to be programmed into the ring's
668  * @addr_hi: 16 MSBs of ring base address to be programmed into the ring's
705  * TCHAN_THRD_ID register programmed with the destination thread if the pairing
713  * RCHAN_THRD_ID register programmed with the source thread if the pairing
888  * be programmed into the tx_pause_on_err field of the channel's TCHAN_TCFG
892  * configuration to be programmed into the tx_filt_einfo field of the
896  * configuration to be programmed into the tx_filt_pswords field of the
900  * interpretation configuration to be programmed into the tx_atype field of
904  * passing mechanism configuration to be programmed into the tx_chan_type
908  * configuration to be programmed into the tx_supr_tdpkt field of the channel's
912  * fetch configuration to be programmed into the tx_fetch_size field of the
917  * configuration to be programmed into the count field of the TCHAN_TCREDIT
921  * programmed into the txcq_qnum field of the TCHAN_TCQ register. The specified
925  * @tx_priority: UDMAP transmit channel transmit priority value to be programmed
928  * @tx_qos: UDMAP transmit channel transmit qos value to be programmed into the
931  * @tx_orderid: UDMAP transmit channel bus order id value to be programmed into
934  * @fdepth: UDMAP transmit channel FIFO depth configuration to be programmed
940  * configuration to be programmed into the priority field of the channel's
944  * programmed into the tx_burst_size field of the TCHAN_TCFG register.
947  * programmed into the tdtype field of the TCHAN_TCFG register:
1014  * fetch configuration to be programmed into the rx_fetch_size field of the
1018  * programmed into the rxcq_qnum field of the RCHAN_RCQ register.
1022  * @rx_priority: UDMAP receive channel receive priority value to be programmed
1025  * @rx_qos: UDMAP receive channel receive qos value to be programmed into the
1028  * @rx_orderid: UDMAP receive channel bus order id value to be programmed into
1032  * configuration to be programmed into the priority field of the channel's
1057  * programmed into the rx_pause_on_err field of the channel's RCHAN_RCFG
1061  * interpretation configuration to be programmed into the rx_atype field of the
1065  * mechanism configuration to be programmed into the rx_chan_type field of the
1069  * to be programmed into the rx_ignore_short field of the RCHAN_RCFG register.
1072  * be programmed into the rx_ignore_long field of the RCHAN_RCFG register.
1075  * programmed into the rx_burst_size field of the RCHAN_RCFG register.
1141  * programmed into the rx_einfo_present field of the flow's RFLOW_RFA register.
1144  * UDMAP receive flow PS words present configuration to be programmed into the
1148  * UDMAP receive flow error handling configuration to be programmed into the
1152  * UDMAP receive flow descriptor type configuration to be programmed into the
1156  * UDMAP receive flow start of packet offset configuration to be programmed
1162  * UDMAP receive flow destination queue configuration to be programmed into the
1170  * programmed into the rx_src_tag_hi field of the flow's RFLOW_RFB register.
1175  * programmed into the rx_src_tag_lo field of the flow's RFLOW_RFB register.
1180  * programmed into the rx_dest_tag_hi field of the flow's RFLOW_RFB register.
1185  * programmed into the rx_dest_tag_lo field of the flow's RFLOW_RFB register.
1190  * programmed into the rx_src_tag_hi_sel field of the RFLOW_RFC register.  See
1195  * programmed into the rx_src_tag_lo_sel field of the RFLOW_RFC register.  See
1200  * programmed into the rx_dest_tag_hi_sel field of the RFLOW_RFC register.  See
1205  * programmed into the rx_dest_tag_lo_sel field of the RFLOW_RFC register.  See
1209  * UDMAP receive flow free descriptor queue 0 configuration to be programmed
1217  * UDMAP receive flow free descriptor queue 1 configuration to be programmed
1225  * UDMAP receive flow free descriptor queue 2 configuration to be programmed
1233  * UDMAP receive flow free descriptor queue 3 configuration to be programmed
1241  * UDMAP receive flow PS words location configuration to be programmed into the