Lines Matching +full:pre +full:- +full:its
1 /* SPDX-License-Identifier: GPL-2.0-only */
16 #include <linux/clk-provider.h>
24 #define BAD_CLK_NAME ((const char *)-1)
33 #define FLAG_SET(obj, type, flag) ((obj)->flags |= FLAG(type, flag))
34 #define FLAG_CLEAR(obj, type, flag) ((obj)->flags &= ~(FLAG(type, flag)))
35 #define FLAG_FLIP(obj, type, flag) ((obj)->flags ^= FLAG(type, flag))
36 #define FLAG_TEST(obj, type, flag) (!!((obj)->flags & FLAG(type, flag)))
40 #define ccu_policy_exists(ccu_policy) ((ccu_policy)->enable.offset != 0)
44 #define policy_exists(policy) ((policy)->offset != 0)
55 #define hyst_exists(hyst) ((hyst)->offset != 0)
60 (div)->u.s.frac_width > 0)
62 #define selector_exists(sel) ((sel)->width != 0)
65 #define policy_lvm_en_exists(enable) ((enable)->offset != 0)
66 #define policy_ctl_exists(control) ((control)->offset != 0)
98 * Gating control and status is managed by a 32-bit gate register.
101 * - (no gate)
103 * - hardware-only gating (auto-gating)
107 * of auto-gated clocks can be read from the gate status bit.
108 * - software-only gating
109 * Auto-gating is not available for this type of clock.
116 * - selectable hardware or software gating
131 * HW means this gate can be auto-gated
135 * ENABLED means this software-managed gate is *supposed* to be enabled
138 #define BCM_CLK_GATE_FLAGS_HW ((u32)1 << 1) /* Can auto-gate */
173 /* A hardware-or-enabled gate (enabled if not under hardware control) */
184 /* A software-only gate */
194 /* A hardware-only gate */
221 * variable. If there are two dividers, they are the "pre-divider"
223 * there is no pre-divider.
225 * A fixed divider is any non-zero (positive) value, and it
228 * The value of a variable divider is maintained in a sub-field of a
229 * 32-bit divider register. The position of the field in the
230 * register is defined by its offset and width. The value recorded
234 * of its bits represent a "fractional" part of the divider. Such
235 * bits comprise the low-order portion of the divider field, and can
238 * fractional bits. Variable dividers with non-zero fraction width
240 * added 1 does *not* affect the low-order bit in this case, it
247 * been left-shifted by the fractional width of a divider. Dividing
254 * using its gate). In addition, a trigger register (described
268 u32 fixed; /* non-zero fixed divider value */
276 * FIXED means it is a fixed-rate divider
279 #define BCM_CLK_DIV_FLAGS_FIXED ((u32)1 << 1) /* Fixed-value */
283 /* A fixed (non-zero) divider */
315 * sub-field of a 32-bit selector register. The range of
359 * case, the "pre-trigger" will be used when changing a clock's
360 * selector and/or its pre-divider.
466 * must be written to its WR_ACCESS register (located at the base