Lines Matching +full:spi +full:- +full:nor
2 * P1022 DS Device Tree Source stub (no addresses or top-level ranges)
13 * * Neither the name of Freescale Semiconductor nor the
36 nor@0,0 {
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
46 label = "ramdisk-nor";
47 read-only;
52 label = "diagnostic-nor";
53 read-only;
58 label = "dink-nor";
59 read-only;
64 label = "kernel-nor";
65 read-only;
70 label = "jffs2-nor";
75 label = "dtb-nor";
76 read-only;
81 label = "u-boot-nor";
82 read-only;
87 #address-cells = <1>;
88 #size-cells = <1>;
89 compatible = "fsl,elbc-fcm-nand";
94 label = "u-boot-nand";
95 read-only;
100 label = "jffs2-nand";
105 label = "ramdisk-nand";
106 read-only;
111 label = "kernel-nand";
116 label = "dtb-nand";
117 read-only;
122 label = "reserved-nand";
126 board-control@3,0 {
127 compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
129 interrupt-parent = <&mpic>;
144 * clock-frequency will be set by U-Boot if
159 spi@7000 {
161 #address-cells = <1>;
162 #size-cells = <1>;
163 compatible = "spansion,s25sl12801", "jedec,spi-nor";
165 spi-max-frequency = <40000000>; /* input clock */
168 label = "u-boot-spi";
170 read-only;
173 label = "kernel-spi";
175 read-only;
178 label = "dtb-spi";
180 read-only;
183 label = "file system-spi";
190 fsl,mode = "i2s-slave";
191 codec-handle = <&wm8776>;
192 fsl,ssi-asynchronous;
204 phy0: ethernet-phy@0 {
208 phy1: ethernet-phy@1 {
212 tbi-phy@2 {
213 device_type = "tbi-phy";
219 compatible = "fsl,etsec-ptp";
222 fsl,tclk-period = <5>;
223 fsl,tmr-prsc = <2>;
224 fsl,tmr-add = <0xc01ebd3d>;
225 fsl,tmr-fiper1 = <999999995>;
226 fsl,tmr-fiper2 = <99990>;
227 fsl,max-adj = <266499999>;
231 phy-handle = <&phy0>;
232 phy-connection-type = "rgmii-id";
236 phy-handle = <&phy1>;
237 phy-connection-type = "rgmii-id";