Lines Matching +full:0 +full:x80000
47 memory@0 {
49 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
81 &qspi { /* MIO 0-5 - U143 */
83 flash@0 { /* MT25QU512A */
87 reg = <0>;
91 partition@0 {
93 reg = <0x0 0x80000>; /* 512KB */
99 reg = <0x80000 0x80000>; /* 512KB */
105 reg = <0x100000 0x20000>; /* 128KB */
109 reg = <0x120000 0x20000>; /* 128KB */
113 reg = <0x140000 0xC0000>; /* 768KB */
117 reg = <0x200000 0xD00000>; /* 13MB */
121 reg = <0xF00000 0x80000>; /* 512KB */
127 reg = <0xF80000 0xD00000>; /* 13MB */
131 reg = <0x1C80000 0x80000>; /* 512KB */
137 reg = <0x1D00000 0x100000>; /* 1MB */
141 reg = <0x1E00000 0x200000>; /* 2MB */
147 reg = <0x2000000 0x200000>; /* 2MB */
153 reg = <0x2200000 0x20000>; /* 128KB */
157 reg = <0x2220000 0x20000>; /* 128KB */
161 reg = <0x2240000 0x10000>; /* 256B but 64KB sector */
167 reg = <0x2250000 0x1db0000>; /* 29.5 MB */
177 xlnx,mio-bank = <0>;
184 tpm@0 { /* slm9670 - U144 */
186 reg = <0>;
197 eeprom: eeprom@50 { /* u46 - also at address 0x58 */
199 reg = <0x50>;
203 eeprom_cc: eeprom@51 { /* required by spec - also at address 0x59 */
205 reg = <0x51>;
208 /* da9062@30 - u170 - also at address 0x31 */
212 reg = <0x33>;
230 reg = <0x32>;
243 * Device acknowledging to addresses 0x5C, 0x5D, 0x70, 0x72, 0x76.
245 * With the FW fix, stdp4320 should respond to address 0x73 only.
253 gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */