Lines Matching +full:tchsh +full:- +full:ns
1 // SPDX-License-Identifier: GPL-2.0
5 * Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/
8 /dts-v1/;
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/net/ti-dp83867.h>
13 #include "k3-am625.dtsi"
16 compatible = "ti,am625-sk", "ti,am625";
30 stdout-path = "serial2:115200n8";
41 reserved-memory {
42 #address-cells = <2>;
43 #size-cells = <2>;
49 record-size = <0x8000>;
50 console-size = <0x8000>;
51 ftrace-size = <0x00>;
52 pmsg-size = <0x8000>;
58 no-map;
62 reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
64 no-map;
67 wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
68 compatible = "shared-dma-pool";
70 no-map;
74 vmain_pd: regulator-0 {
76 compatible = "regulator-fixed";
77 regulator-name = "vmain_pd";
78 regulator-min-microvolt = <5000000>;
79 regulator-max-microvolt = <5000000>;
80 regulator-always-on;
81 regulator-boot-on;
84 vcc_5v0: regulator-1 {
86 compatible = "regulator-fixed";
87 regulator-name = "vcc_5v0";
88 regulator-min-microvolt = <5000000>;
89 regulator-max-microvolt = <5000000>;
90 vin-supply = <&vmain_pd>;
91 regulator-always-on;
92 regulator-boot-on;
95 vcc_3v3_sys: regulator-2 {
96 /* output of LM61460-Q1 */
97 compatible = "regulator-fixed";
98 regulator-name = "vcc_3v3_sys";
99 regulator-min-microvolt = <3300000>;
100 regulator-max-microvolt = <3300000>;
101 vin-supply = <&vmain_pd>;
102 regulator-always-on;
103 regulator-boot-on;
106 vdd_mmc1: regulator-3 {
108 compatible = "regulator-fixed";
109 regulator-name = "vdd_mmc1";
110 regulator-min-microvolt = <3300000>;
111 regulator-max-microvolt = <3300000>;
112 regulator-boot-on;
113 enable-active-high;
114 vin-supply = <&vcc_3v3_sys>;
118 vdd_sd_dv: regulator-4 {
120 compatible = "regulator-gpio";
121 regulator-name = "tlv71033";
122 pinctrl-names = "default";
123 pinctrl-0 = <&vdd_sd_dv_pins_default>;
124 regulator-min-microvolt = <1800000>;
125 regulator-max-microvolt = <3300000>;
126 regulator-boot-on;
127 vin-supply = <&vcc_5v0>;
134 compatible = "gpio-leds";
135 pinctrl-names = "default";
136 pinctrl-0 = <&usr_led_pins_default>;
138 led-0 {
139 label = "am62-sk:green:heartbeat";
141 linux,default-trigger = "heartbeat";
143 default-state = "off";
149 main_uart0_pins_default: main-uart0-pins-default {
150 pinctrl-single,pins = <
156 main_i2c0_pins_default: main-i2c0-pins-default {
157 pinctrl-single,pins = <
163 main_i2c1_pins_default: main-i2c1-pins-default {
164 pinctrl-single,pins = <
170 main_i2c2_pins_default: main-i2c2-pins-default {
171 pinctrl-single,pins = <
177 main_mmc0_pins_default: main-mmc0-pins-default {
178 pinctrl-single,pins = <
192 main_mmc1_pins_default: main-mmc1-pins-default {
193 pinctrl-single,pins = <
204 usr_led_pins_default: usr-led-pins-default {
205 pinctrl-single,pins = <
210 main_mdio1_pins_default: main-mdio1-pins-default {
211 pinctrl-single,pins = <
217 main_rgmii1_pins_default: main-rgmii1-pins-default {
218 pinctrl-single,pins = <
234 main_rgmii2_pins_default: main-rgmii2-pins-default {
235 pinctrl-single,pins = <
251 ospi0_pins_default: ospi0-pins-default {
252 pinctrl-single,pins = <
267 vdd_sd_dv_pins_default: vdd-sd-dv-pins-default {
268 pinctrl-single,pins = <
273 main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-pins-default {
274 pinctrl-single,pins = <
290 pinctrl-names = "default";
291 pinctrl-0 = <&main_uart0_pins_default>;
328 pinctrl-names = "default";
329 pinctrl-0 = <&main_i2c0_pins_default>;
330 clock-frequency = <400000>;
334 pinctrl-names = "default";
335 pinctrl-0 = <&main_i2c1_pins_default>;
336 clock-frequency = <400000>;
341 gpio-controller;
342 #gpio-cells = <2>;
343 gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
356 interrupt-parent = <&main_gpio1>;
358 interrupt-controller;
359 #interrupt-cells = <2>;
361 pinctrl-names = "default";
362 pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
375 pinctrl-names = "default";
376 pinctrl-0 = <&main_mmc0_pins_default>;
377 ti,driver-strength-ohm = <50>;
378 disable-wp;
383 vmmc-supply = <&vdd_mmc1>;
384 vqmmc-supply = <&vdd_sd_dv>;
385 pinctrl-names = "default";
386 pinctrl-0 = <&main_mmc1_pins_default>;
387 ti,driver-strength-ohm = <50>;
388 disable-wp;
392 pinctrl-names = "default";
393 pinctrl-0 = <&main_mdio1_pins_default
399 phy-mode = "rgmii-rxid";
400 phy-handle = <&cpsw3g_phy0>;
404 phy-mode = "rgmii-rxid";
405 phy-handle = <&cpsw3g_phy1>;
409 cpsw3g_phy0: ethernet-phy@0 {
411 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
412 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
413 ti,min-output-impedance;
416 cpsw3g_phy1: ethernet-phy@1 {
418 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
419 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
420 ti,min-output-impedance;
425 mbox_m4_0: mbox-m4-0 {
426 ti,mbox-rx = <0 0 0>;
427 ti,mbox-tx = <1 0 0>;
432 pinctrl-names = "default";
433 pinctrl-0 = <&ospi0_pins_default>;
436 compatible = "jedec,spi-nor";
438 spi-tx-bus-width = <8>;
439 spi-rx-bus-width = <8>;
440 spi-max-frequency = <25000000>;
441 cdns,tshsl-ns = <60>;
442 cdns,tsd2d-ns = <60>;
443 cdns,tchsh-ns = <60>;
444 cdns,tslch-ns = <60>;
445 cdns,read-delay = <4>;
448 compatible = "fixed-partitions";
449 #address-cells = <1>;
450 #size-cells = <1>;
463 label = "ospi.u-boot";